Changelog 745 (RC3)
Re: Heads up! Big update comming. Public Release RC2 ready.
I'm pretty sure I added all of the standard Warlock skills to the database plus a few elites. Although they may not be all set up correctly.
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:- “They say hard work never hurt anybody, but I figure, why take the chance.”
- Ronald Reagan
Re: Heads up! Big update comming. Public Release RC2 ready.
I unzipped to the scripts folder but I'm getting the error that my ingamefuntions folder is out of date. It works fine with the original rombot and should be the current one. 744. Any idea?
Re: Heads up! Big update comming. Public Release RC2 ready.
It says something like, you have version 4 and need version 5. Copy the files from **** folder to **** folder.883Dman wrote:I unzipped to the scripts folder but I'm getting the error that my ingamefuntions folder is out of date.
Did you do what it told you to do?
Remember no matter you do in life to always have a little fun while you are at it
wiki here http://www.solarstrike.net/wiki/index.php?title=Manual
wiki here http://www.solarstrike.net/wiki/index.php?title=Manual
Re: Heads up! Big update comming. Public Release RC2 ready.
I did but it is possible I forgot to copy the userfunctions from rombot to the RC2 userfunction folder. I just did this now it is failing to index itemtypes.lua.
I copied my profiles and waypoints to the RC2 appropriate folders and use the startbot.bat to run it. See attachment.
I just hope the new version fixes "clearing target" issue. Warden dies all the time from it. Don't clear it, kill it!!! XD
I copied my profiles and waypoints to the RC2 appropriate folders and use the startbot.bat to run it. See attachment.
I just hope the new version fixes "clearing target" issue. Warden dies all the time from it. Don't clear it, kill it!!! XD
Last edited by 883Dman on Mon Dec 10, 2012 11:04 pm, edited 1 time in total.
Re: Heads up! Big update comming. Public Release RC2 ready.
If I didn't understnd it wrong you have to put the whole RC2 folder into micromacro/scripts next to the "rom" folder !?
Btw: You censored your characters it asked you you want to play on, but you didn't censor the character it loads the profile of
Btw: You censored your characters it asked you you want to play on, but you didn't censor the character it loads the profile of
Re: Heads up! Big update comming. Public Release RC2 ready.
DOH! I have a cold and it is affecting my mental faculties.
Yeah. RC2 folder is in the same folder as the original rom. I assume I launch by typing rc2/bot instead of rom/bot to use RC2. The RC2 userfunctions folder was empty so i copied the rom userfunctions contents to it.
Yeah. RC2 folder is in the same folder as the original rom. I assume I launch by typing rc2/bot instead of rom/bot to use RC2. The RC2 userfunctions folder was empty so i copied the rom userfunctions contents to it.
Re: Heads up! Big update comming. Public Release RC2 ready.
There is no reason for that to fail. It hasn't even been changed, well not significantly anyway. Try copying all the rc2 files over again. If it still happens we will have to add a print message to try and figure out what is happening.883Dman wrote:it is failing to index itemtypes.lua.
Well try it and let me know.883Dman wrote:I just hope the new version fixes "clearing target" issue. Warden dies all the time from it. Don't clear it, kill it!!! XD
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:- “They say hard work never hurt anybody, but I figure, why take the chance.”
- Ronald Reagan
Re: Heads up! Big update comming. Public Release RC2 ready.
it does'nt fix it im afraid, for me it still clears target, even when its very obvious i do damage xd
hitting for almost 10k damage, and then bot decides its not doing any
hitting for almost 10k damage, and then bot decides its not doing any
Re: Heads up! Big update comming. Public Release RC2 ready.
Explain a bit more the situation. Is this during a normal attack during a normal waypoint file? Is it with rbassist? Are you aggroed by multiple mobs. Are you in a party? When during the fight does it clear target? Are you using any code in onskillcast or onpreskillcast? Are you using any userfunctions that use registered event timers such as gmmonitor?botje wrote:it does'nt fix it im afraid, for me it still clears target, even when its very obvious i do damage xd
hitting for almost 10k damage, and then bot decides its not doing any
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:- “They say hard work never hurt anybody, but I figure, why take the chance.”
- Ronald Reagan
Re: Heads up! Big update comming. Public Release RC2 ready.
both normal and RBassist, more or 1 mobs, happens either way, alone and in party.
i use GMmonitor, and have code in both skill and preskill
i use GMmonitor, and have code in both skill and preskill
Re: Heads up! Big update comming. Public Release RC2 ready.
running my warden atm, been going for about an hour and no issues here.
maybe try playing with this
maybe try playing with this
Code: Select all
<option name="MAX_FIGHT_TIME" value="20" />
Remember no matter you do in life to always have a little fun while you are at it
wiki here http://www.solarstrike.net/wiki/index.php?title=Manual
wiki here http://www.solarstrike.net/wiki/index.php?title=Manual
Re: Heads up! Big update comming. Public Release RC2 ready.
Recopied everything on my second comp and seems to be working. Should be able to get it to work on my main PC soon. No idea what I did different unless i have an addon conflict on my main that is not present on my secondary PC.
Re: Heads up! Big update comming. Public Release RC2 ready.
I did notice a bunch of failed casts and breaking target because it "wasn't damaging it" but that was after running all night, switching characters for dailies and such. I rebooted my comp and they went away so I think it is a memory issue. Perhaps partly from the micromacro and partly from ROM's inherent terrible memory management.
One problem I have, unrelated, is my eoj farm. The origninal eoj extinguish the flames quest works great. But I made a second set of waypoints for another flame spot and it crashes intermittently. I copied all the code from the original and just switched out the flame spots but I get an invalid memory read or something. Sometimes it can go for hours before crashing and sometimes in an hour or less. Happens with old rombot and new. I can repost this in another spot if you point me to the right place. I'll post a screenshot of the error when it happens again.
One problem I have, unrelated, is my eoj farm. The origninal eoj extinguish the flames quest works great. But I made a second set of waypoints for another flame spot and it crashes intermittently. I copied all the code from the original and just switched out the flame spots but I get an invalid memory read or something. Sometimes it can go for hours before crashing and sometimes in an hour or less. Happens with old rombot and new. I can repost this in another spot if you point me to the right place. I'll post a screenshot of the error when it happens again.
Re: Heads up! Big update comming. Public Release RC2 ready.
Been doing some testing today, TBH no idea what version of everything I am using atm but I am getting an issue constantly which never used to be an issue.
While at loadingscreen the bot used to stop doing romscripts and such, I think timers were "suspended" aswell, can;t remember for sure.
Pretty much everytime I go through a portal atm bot is crashing with either errors trying to use macros in game or the other is the ExpPerMin error printing to window tab (timed event).
[600] = "RoM Bot %s [%s] (%d,%d) - %d exp/min, %d minutes till level up",
The value is gotten direct from memory but obviously it will have issues doing that while in loadingscreen.
While at loadingscreen the bot used to stop doing romscripts and such, I think timers were "suspended" aswell, can;t remember for sure.
Pretty much everytime I go through a portal atm bot is crashing with either errors trying to use macros in game or the other is the ExpPerMin error printing to window tab (timed event).
[600] = "RoM Bot %s [%s] (%d,%d) - %d exp/min, %d minutes till level up",
The value is gotten direct from memory but obviously it will have issues doing that while in loadingscreen.
Remember no matter you do in life to always have a little fun while you are at it
wiki here http://www.solarstrike.net/wiki/index.php?title=Manual
wiki here http://www.solarstrike.net/wiki/index.php?title=Manual
Re: Heads up! Big update comming. Public Release RC2 ready.
Is this with normal waypoints or part bot etc? What can I try to reproduce the problem?
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:- “They say hard work never hurt anybody, but I figure, why take the chance.”
- Ronald Reagan
Re: Heads up! Big update comming. Public Release RC2 ready.
since the issue is with setwindow and loading screen just do anything that makes you go through a portal.
I was farming DoD with party bot, MM crashed pretty much anytime I went through a portal with that error lol
I was farming DoD with party bot, MM crashed pretty much anytime I went through a portal with that error lol
Remember no matter you do in life to always have a little fun while you are at it
wiki here http://www.solarstrike.net/wiki/index.php?title=Manual
wiki here http://www.solarstrike.net/wiki/index.php?title=Manual
Re: Heads up! Big update comming. Public Release RC2 ready.
But I was going through portals when I was testing GoThroughPortal. I didn't get any errors then. Did you?
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:- “They say hard work never hurt anybody, but I figure, why take the chance.”
- Ronald Reagan
Re: Heads up! Big update comming. Public Release RC2 ready.
Well probably same problem I've mentioned somewhere else, when bot simply doesn't recognise going trough portal. I've solved this by using gotroughportal userfunction. DK if it helps hope so...
Re: Heads up! Big update comming. Public Release RC2 ready.
When I was testing the gothroughportal I was just doing it with commandlinerock5 wrote:But I was going through portals when I was testing GoThroughPortal. I didn't get any errors then. Did you?
I'll see if I get some time tomorrow to play around and hopefully work out why the error is occuring.
Remember no matter you do in life to always have a little fun while you are at it
wiki here http://www.solarstrike.net/wiki/index.php?title=Manual
wiki here http://www.solarstrike.net/wiki/index.php?title=Manual
Re: Heads up! Big update comming. Public Release RC2 ready.
This is the error
I added a print which is the 0
Now the really interesting thing for me is the prints were showing something, weird.
I killed 1 mob for 509 xp, then started to zone in and out, it kept the numbers over 10mil for a good 20 seconds, gradually going down. Then after this zoning it went up to 13 mil. No more killing still just that 1 mob for 509 xp.
Must be an issue with the calculation and at some stage it went to a number it wouldn't print with %d
Code: Select all
0
Did not find any crashed game clients.
DEBUG: Script execution complete.
DEBUG: Check fail state.
12:27am - C:/micromacro52/scripts/rc2/functions.lua:489: bad argument #7 to 'string.format' (not a number in proper range)
DEBUG: Flash window.
DEBUG: Return from function 'run'.
Code: Select all
print(player.ExpPerMin)
local displayname = string.sub(profile, 1, 4) .. "****";
if( (player.X ~= LAST_PLAYER_X) or (player.Z ~= LAST_PLAYER_Z) ) then
setWindowName(getHwnd(), sprintf(language[600],
BOT_VERSION, displayname, player.X, player.Z, player.ExpPerMin, player.TimeTillLevel));
LAST_PLAYER_X = player.X;
LAST_PLAYER_Z = player.Z;
end
I killed 1 mob for 509 xp, then started to zone in and out, it kept the numbers over 10mil for a good 20 seconds, gradually going down. Then after this zoning it went up to 13 mil. No more killing still just that 1 mob for 509 xp.
Code: Select all
7492076.6666667
7492076.6666667
7492076.6666667
7492076.6666667
7492076.6666667
Not in game. Waiting till you reenter game...
7492076.6666667
7492076.6666667
7492076.6666667
13485738
13485738
13485738
Remember no matter you do in life to always have a little fun while you are at it
wiki here http://www.solarstrike.net/wiki/index.php?title=Manual
wiki here http://www.solarstrike.net/wiki/index.php?title=Manual
Who is online
Users browsing this forum: No registered users and 1 guest