--=== Official patch 4.0.7.2482 topic ===--
--=== Official patch 4.0.7.2482 topic ===--
I was in a good mood today so I decided to update the addresses instead of waiting for Lisa to do most of it. Just as well, Lisa seems to be MIA.
They are updated in revision 691.
It's pretty rough and fast but I think hoprfully all of them are correct.
Here is a summary of what I updated.
Couldn't find a neat way to show them so took a pic.
They are updated in revision 691.
It's pretty rough and fast but I think hoprfully all of them are correct.
Here is a summary of what I updated.
Couldn't find a neat way to show them so took a pic.
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:- “They say hard work never hurt anybody, but I figure, why take the chance.”
- Ronald Reagan
Re: --=== Official patch 4.0.7.2482 topic ===--
I forgot to say. The one I'm most worried about is partyMemberList_address as it is right next to the address with the unusual difference of 344. That's an annoying one to work out and test so I just left it as a guess of a difference of 28. I suppose partiers will let us know soon enough if it doesn't work.
Also I didn't update swimAddress because I could find no reference to it in my rom folder.
Also I didn't update swimAddress because I could find no reference to it in my rom folder.
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:- “They say hard work never hurt anybody, but I figure, why take the chance.”
- Ronald Reagan
Re: --=== Official patch 4.0.7.2482 topic ===--
Swimhack pointer: 0x44E190
Re: --=== Official patch 4.0.7.2482 topic ===--
I had a party of 2 chars in ks. First one I operate manually and second one is healer and uses the partyheal script.
The problem is that the second char won't heal the first one, instead it just get alot of "id not found"
The problem is that the second char won't heal the first one, instead it just get alot of "id not found"
Here is my gathering waypoints: http://solarstrike.net/phpBB3/viewtopic.php?f=27&t=3603
Re: --=== Official patch 4.0.7.2482 topic ===--
Updated the swimAddress in rev 692.
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:- “They say hard work never hurt anybody, but I figure, why take the chance.”
- Ronald Reagan
Re: --=== Official patch 4.0.7.2482 topic ===--
I can confirm that party does not work, at least checkparty() function isn't working
tables was 0x28, tested here before posting that question earlier.
I just don't know how to find that partyMemberList_address =)
tables was 0x28, tested here before posting that question earlier.
I just don't know how to find that partyMemberList_address =)
Re: --=== Official patch 4.0.7.2482 topic ===--
update, you are right on that picture, but the svn haven't been updated
partyMemberList_address = 0x9EEBE8, works
partyMemberList_address = 0x9EEBE8, works
Re: --=== Official patch 4.0.7.2482 topic ===--
Strange. How did that happen? Probably just didn't copy the values over properly. Also rentBagBase wasn't updated.
Updated rev 693.
Edit: oops commited all my current changes. Not necessarily a bad thing but there was one mistack in getid.lua. I'll have to revert it in my next commit.
Updated rev 693.
Edit: oops commited all my current changes. Not necessarily a bad thing but there was one mistack in getid.lua. I'll have to revert it in my next commit.
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:- “They say hard work never hurt anybody, but I figure, why take the chance.”
- Ronald Reagan
-
- Posts: 276
- Joined: Thu Oct 22, 2009 3:58 am
Re: --=== Official patch 4.0.7.2482 topic ===--
I am getting various errors
this is a big error...
This is my Onload section. I have 10 KS Chars. Each char has 3 Housekeepers to get the neccessary buffs for doing KS.
Each Maid has a differnt name, to be able to click on them I prepared a special onload section
This is the code in the Waypoint file "in the house" it worked for over 6 month just fine but now i have a error message
"target_NPC(): Bitte geben Sie den Namen des NPC an, der gesucht werden soll." Even leaving the house wont work anymore
sometime it freeze after entering the home. i tried various things with waitForLoadingScreen and yrest's.
Any Ideas?
Code: Select all
Wir gehen zum Wegpunkt #4, (-29499, 1240)
Wir gehen zum Wegpunkt #5, (-29498, 1190)
Wir gehen zum Wegpunkt #6, (-29497, 1121)
Wir gehen zum Wegpunkt #7, (-29498, 1061)
Wir versuchen den NPC Kulade zu finden:
Der NPC 'Kulade' wurde erfolgreich ausgewählt. Wir öffnen das Dialogfenster.
Spieleradresse geändert: 0x389E0F00
Fernkampffähigkeit gefunden: MAGE_FLAME
target_NPC(): Bitte geben Sie den Namen des NPC an, der gesucht werden soll.
Drücke MACRO: RoMScript ausführen "SpeakFrame_ListDialogOption(1, 6)".
Drücke MACRO: RoMScript ausführen "SpeakFrame_ListDialogOption(1, 6)".
Drücke MACRO: RoMScript ausführen "SpeakFrame_ListDialogOption(1, 6)".
Drücke MACRO: RoMScript ausführen "SpeakFrame_ListDialogOption(1, 6)".
Drücke MACRO: RoMScript ausführen "SpeakFrame_ListDialogOption(1, 6)".
target_NPC(): Bitte geben Sie den Namen des NPC an, der gesucht werden soll.
Drücke MACRO: RoMScript ausführen "SpeakFrame_ListDialogOption(1, 6)".
Drücke MACRO: RoMScript ausführen "SpeakFrame_ListDialogOption(1, 6)".
Drücke MACRO: RoMScript ausführen "SpeakFrame_ListDialogOption(1, 6)".
Drücke MACRO: RoMScript ausführen "SpeakFrame_ListDialogOption(1, 6)".
Drücke MACRO: RoMScript ausführen "SpeakFrame_ListDialogOption(1, 6)".
target_NPC(): Bitte geben Sie den Namen des NPC an, der gesucht werden soll.
Drücke MACRO: RoMScript ausführen "SpeakFrame_ListDialogOption(1, 6)".
Drücke MACRO: RoMScript ausführen "SpeakFrame_ListDialogOption(1, 6)".
Drücke MACRO: RoMScript ausführen "SpeakFrame_ListDialogOption(1, 6)".
Drücke MACRO: RoMScript ausführen "SpeakFrame_ListDialogOption(1, 6)".
Drücke MACRO: RoMScript ausführen "SpeakFrame_ListDialogOption(1, 6)".
Wir versuchen den NPC Hausm.dchen zu finden:
Wir können den NPC Hausm.dchen nicht finden!
Bot pausiert. (ENTF) drücken um weiterzumachen, (CTRL+L) beendet den Bot, (CTRL
C) schließt das Micromacro Fenster
This is my Onload section. I have 10 KS Chars. Each char has 3 Housekeepers to get the neccessary buffs for doing KS.
Each Maid has a differnt name, to be able to click on them I prepared a special onload section
Code: Select all
if (player.Name == _secondChar) then
maidone = "Dhaunae Wiliams"; maidtwo = "Kate Kenafin"; maidtre = "Gelress Wamor";
end
"target_NPC(): Bitte geben Sie den Namen des NPC an, der gesucht werden soll." Even leaving the house wont work anymore
sometime it freeze after entering the home. i tried various things with waitForLoadingScreen and yrest's.
Any Ideas?
Code: Select all
player:target_NPC(maidone);
sendMacro("SpeakFrame_ListDialogOption(1, 6)");yrest(300);
sendMacro("SpeakFrame_ListDialogOption(1, 6)");yrest(300);
sendMacro("SpeakFrame_ListDialogOption(1, 6)");yrest(300);
sendMacro("SpeakFrame_ListDialogOption(1, 6)");yrest(300);
sendMacro("SpeakFrame_ListDialogOption(1, 6)");
player:target_NPC(maidtwo);
sendMacro("SpeakFrame_ListDialogOption(1, 6)");yrest(300);
sendMacro("SpeakFrame_ListDialogOption(1, 6)");yrest(300);
sendMacro("SpeakFrame_ListDialogOption(1, 6)");yrest(300);
sendMacro("SpeakFrame_ListDialogOption(1, 6)");yrest(300);
sendMacro("SpeakFrame_ListDialogOption(1, 6)");
player:target_NPC(maidtre);
sendMacro("SpeakFrame_ListDialogOption(1, 6)");yrest(300);
sendMacro("SpeakFrame_ListDialogOption(1, 6)");yrest(300);
sendMacro("SpeakFrame_ListDialogOption(1, 6)");yrest(300);
sendMacro("SpeakFrame_ListDialogOption(1, 6)");yrest(300);
sendMacro("SpeakFrame_ListDialogOption(1, 6)");
player:target_NPC("Hausm.dchen"); --leave the house
RoMScript("SpeakFrame_ListDialogOption(1, 1)");
-
- Posts: 276
- Joined: Thu Oct 22, 2009 3:58 am
Re: --=== Official patch 4.0.7.2482 topic ===--
it seems that i cant target npc in the house any more
Code: Select all
<?xml version="1.0" encoding="utf-8"?><waypoints>
<!-- # 1--> <waypoint x="4" z="7" y="0" tag="thehouse">
player:target_NPC("Louis Bodin");
sendMacro("SpeakFrame_ListDialogOption(1, 6)"); -- for lucky powder dust
yrest(300);
</waypoint></waypoints>
Re: --=== Official patch 4.0.7.2482 topic ===--
speed hack and teleport hack does not work
Re: --=== Official patch 4.0.7.2482 topic ===--
Cannot confirm, work excellent for me. Make sure you copy userfunctions files to proper place and update micromacro and rombot to latest SVN, then revert any modified files.Gully wrote:speed hack and teleport hack does not work
Re: --=== Official patch 4.0.7.2482 topic ===--
I discovered strange rombot behaviour when Internet get disconnected.
Bot 9 running bots, 4 of them stop working throwing an errors like those:
5 bots continue running, saying all hens are stuck or just keep trying to harvest an object All RoM windows were disconnected, on login in screen. I think rombot should detect when RoM gets disconnected and character is offline.
Bot 9 running bots, 4 of them stop working throwing an errors like those:
Code: Select all
0:26am - X:/Programs/micromacro/scripts/rom/functions.lua:646: bad argument #1 to 'memoryR
eadByte' ((null))
Code: Select all
0:25am - X:/Programs/micromacro/scripts/rom/macros.lua:162: bad argument #1 to 'memoryRead
UInt' ((null))
Re: --=== Official patch 4.0.7.2482 topic ===--
Yeah suddenly felt very ill last night, not sure what it was but I went to bed and got plenty of rest.rock5 wrote: Just as well, Lisa seems to be MIA.
So are all the addresses found?
Remember no matter you do in life to always have a little fun while you are at it
wiki here http://www.solarstrike.net/wiki/index.php?title=Manual
wiki here http://www.solarstrike.net/wiki/index.php?title=Manual
Re: --=== Official patch 4.0.7.2482 topic ===--
Not being able to target the npcs in the house is a known issue. I believe it has been reported at least once before the patch and I think I noticed it before too but it wasn't fixed.Germangold wrote:it seems that i cant target npc in the house any more
Just had another look. Looks like npcs (and objects) have type 0 which is the default 'none' for the bot. So a "Type" of 0 is now a valid value. I'll try changing the default to -1 and see if I can get it working.
Edit: Update to revision 694 and see how that works.
I hope you're feeling better. Luckily I was in the mood to do some work so it turned out ok.lisa wrote:Yeah suddenly felt very ill last night, not sure what it was but I went to bed and got plenty of rest.
So are all the addresses found?
I think the addresses are all correct. As you can see a lot of them were guesses but I think they are all correct now. Everything seems to be working.
- Please consider making a small donation to me to support my continued contributions to the bot and this forum. Thank you. Donate
- I check all posts before reading PMs. So if you want a fast reply, don't PM me but post a topic instead. PM me for private or personal topics only.
- How to: copy and paste in micromacro
________________________
Quote:- “They say hard work never hurt anybody, but I figure, why take the chance.”
- Ronald Reagan
Re: --=== Official patch 4.0.7.2482 topic ===--
yeah done some testing, looks good so far =)
Remember no matter you do in life to always have a little fun while you are at it
wiki here http://www.solarstrike.net/wiki/index.php?title=Manual
wiki here http://www.solarstrike.net/wiki/index.php?title=Manual
Re: --=== Official patch 4.0.7.2482 topic ===--
How to completely disable sound support in micromacro.exe?
During investigating very high CPU usage by micromacro in another thread, I discovered, thread called dsound.dll+0x4f9d in every process of micromacro.exe is using often more CPU cycles then main thread itself! And I don't have sound actions in any of my waypoints at the moment. By fixing this (why is sound DLL eating CPU when not using any sound?) we could cut micromacro's CPU usage by half.
dsound.dll is a part of Microsoft DirectX http://www.processlibrary.com/directory ... und/20757/
Screenshots from Process Explorer in attachments.
During investigating very high CPU usage by micromacro in another thread, I discovered, thread called dsound.dll+0x4f9d in every process of micromacro.exe is using often more CPU cycles then main thread itself! And I don't have sound actions in any of my waypoints at the moment. By fixing this (why is sound DLL eating CPU when not using any sound?) we could cut micromacro's CPU usage by half.
dsound.dll is a part of Microsoft DirectX http://www.processlibrary.com/directory ... und/20757/
Screenshots from Process Explorer in attachments.
-
- Posts: 276
- Joined: Thu Oct 22, 2009 3:58 am
Re: --=== Official patch 4.0.7.2482 topic ===--
if its a onboard soundcard just deactivate it on mainboards bios
i guess that should work
i guess that should work
Re: --=== Official patch 4.0.7.2482 topic ===--
Mate, I need sound in my computer, I'm using this luxury feature everyday;) I just want to disable its support in console application, which is not using any sound and just eating CPU.Germangold wrote:if its a onboard soundcard just deactivate it on mainboards bios
i guess that should work
Currently I am testing custom patched micromacro from Administrator:)
Who is online
Users browsing this forum: Ahrefs [Bot], Bing [Bot] and 21 guests