RoM bot
Re: RoM bot
Wall climbing happens sometimes @ me too^^
Re: RoM bot
all it says for the log is avoiding ksing (...) and taking too long to damage target.
i died, it thought i was still alive (moving to waypoint ... then waypoint movement failed).
i died, it thought i was still alive (moving to waypoint ... then waypoint movement failed).
-
- Posts: 27
- Joined: Mon Mar 23, 2009 4:49 am
Re: RoM bot
Thanks for the updates.
I suggest everyone to use this addon http://rom.curse.com/downloads/rom-addo ... binfo.aspx and if you understand how to get death waypoints working, you can make sure the death way points run past a Shop and pause, click the npc then click let me see what you have to sell then the addon will repair for you.
You can also make your waypoint loop x amount times then run another way point to go and repair before dying as well.
Just think outside the box a little and this bot can do more.
I suggest everyone to use this addon http://rom.curse.com/downloads/rom-addo ... binfo.aspx and if you understand how to get death waypoints working, you can make sure the death way points run past a Shop and pause, click the npc then click let me see what you have to sell then the addon will repair for you.
You can also make your waypoint loop x amount times then run another way point to go and repair before dying as well.
Just think outside the box a little and this bot can do more.
- Administrator
- Site Admin
- Posts: 5307
- Joined: Sat Jan 05, 2008 4:21 pm
Re: RoM bot
Code: Select all
Wall climbing happens sometimes @ me too^^
I think the offset that was being used to detect death changed in the latest patch. I'll mess with it later and see if I can't get this fixed.all it says for the log is avoiding ksing (...) and taking too long to damage target.
i died, it thought i was still alive (moving to waypoint ... then waypoint movement failed).
-
- Posts: 27
- Joined: Mon Mar 23, 2009 4:49 am
Re: RoM bot
Does anyone know where I can find a complete list of commands and scripting examples for runes of magics.
What I am looking for is a way to communicate with an npc via macro's, Trying to see if I can target him and trigger the dialog via the macro system, this will allow me to avoid the problematic issues that I come to when reaching a way point.
I never seem to come to the way point the same way each time, hence if we can trigger npc dialog via the ingame macro system, then the detach mose click should allow us to sell gear/repair and even buy.
Thanks in advance
What I am looking for is a way to communicate with an npc via macro's, Trying to see if I can target him and trigger the dialog via the macro system, this will allow me to avoid the problematic issues that I come to when reaching a way point.
I never seem to come to the way point the same way each time, hence if we can trigger npc dialog via the ingame macro system, then the detach mose click should allow us to sell gear/repair and even buy.
Thanks in advance
- Administrator
- Site Admin
- Posts: 5307
- Joined: Sat Jan 05, 2008 4:21 pm
Re: RoM bot
Here's a few references:
http://theromwiki.com/index.php/List_of_Events
http://theromwiki.com/index.php/List_of_Functions
There are, of course, a few examples on that wiki, but those two pages I find to be most useful. There was another site which I had bookmarked that was better in my opinion, but it was all in German.
If you do find a way to interact with NPCs in a decent manner using macros, let me know. I might be able to use it in a system I'm working on.
http://theromwiki.com/index.php/List_of_Events
http://theromwiki.com/index.php/List_of_Functions
There are, of course, a few examples on that wiki, but those two pages I find to be most useful. There was another site which I had bookmarked that was better in my opinion, but it was all in German.
If you do find a way to interact with NPCs in a decent manner using macros, let me know. I might be able to use it in a system I'm working on.
-
- Posts: 27
- Joined: Mon Mar 23, 2009 4:49 am
Re: RoM bot
Thanks I will have to see if what Im thinking will work.
I am thinking TargetNearestFriend will target the npc, the maybe the attack command to engage in conversation, will test it when I get home.
I am thinking TargetNearestFriend will target the npc, the maybe the attack command to engage in conversation, will test it when I get home.
- 3cmSailorfuku
- Posts: 354
- Joined: Mon Jan 21, 2008 6:25 pm
Re: RoM bot
There's a function to directly target an NPC with it's NPCid. Even a function to directly repair your whole equipment without opening the conversation, but I believe those weren't documentated yet so you gotta reverse it with IDA/Olly/etc and see what parameters it takes. I don't involve myself with Runes of Magic anymore though, so there might be a complete list of what parameters each function takes.ellamental wrote:Thanks I will have to see if what Im thinking will work.
I am thinking TargetNearestFriend will target the npc, the maybe the attack command to engage in conversation, will test it when I get home.
For example, WorldMap_AutoMoveByNpcID(); would move to the requested NPC automatically.
Last edited by 3cmSailorfuku on Sat Apr 18, 2009 9:37 am, edited 2 times in total.
-
- Posts: 5
- Joined: Sun Mar 15, 2009 3:26 pm
Re: RoM bot
dunno what happened in the new version, but my character doesnt move on the way of the designated waypoints, he deviates. not much but enough to run into trees and fences. it may be that movement randomization was meant to make a bot seem less like abot but now he just stucks everywhere.
can i disable that randomization somehow?
everything else is working perfectly no complaints
can i disable that randomization somehow?
everything else is working perfectly no complaints
- 3cmSailorfuku
- Posts: 354
- Joined: Mon Jan 21, 2008 6:25 pm
Re: RoM bot
Congratulations, you just solved your question yourself. As the documentation states, deviation is disabled with 0.csigabogar wrote:dunno what happened in the new version, but my character doesnt move on the way of the designated waypoints, he deviates. not much but enough to run into trees and fences. it may be that movement randomization was meant to make a bot seem less like abot but now he just stucks everywhere.
can i disable that randomization somehow?
everything else is working perfectly no complaints
A temporary solution for straying off the path too much would be using the subtracted amount of added "randomness" to the next point which was used before.
This probably could ensure that the bot keeps in the designated area and doesn't increase in size with each turn.
This is just theory and I haven't looked up how it works right now in the bot, but I assume there is a high possibility of it increasing it's volume as of what I heard from others.
Last edited by 3cmSailorfuku on Sat Apr 18, 2009 9:58 am, edited 3 times in total.
-
- Posts: 5
- Joined: Sun Mar 15, 2009 3:26 pm
Re: RoM bot
thanks didnt know i can do that ill look at the documentatuion to see where i can change the value.
- 3cmSailorfuku
- Posts: 354
- Joined: Mon Jan 21, 2008 6:25 pm
Re: RoM bot
csigabogar wrote:thanks didnt know i can do that ill look at the documentatuion to see where i can change the value.
If your profile doesn't feature this, you should just delete the whole script folder, redownloaded the script and recreate your profile and waypoints. (I would do this for every released version of the bot)WAYPOINT_DEVIATION : A 'random' offset applied to each waypoint in your path giving it less of a bot-like appearance; suggested value of 50. Lower value means you stick closer to your normal path; 0 means no deviation.
-
- Posts: 5
- Joined: Sun Mar 15, 2009 3:26 pm
Re: RoM bot
aha, that was the problem lol, i updated everything but the profile file didnt want to do it again i was lazy, i resolved it now it works, thx!
- Administrator
- Site Admin
- Posts: 5307
- Joined: Sat Jan 05, 2008 4:21 pm
Re: RoM bot
Updated to 2.33. Mostly bug fixes this time. Player death should be detected better now. Hopefully, this means the resurrection system works well. Skill priority (as set in your profile) should now be working again.
New features:
Select a language (English ("english") and German ("deutsch") only at this time)
Detection and notice of client updates that might affect the bot.
New features:
Select a language (English ("english") and German ("deutsch") only at this time)
Detection and notice of client updates that might affect the bot.
Re: RoM bot
2 things:
1. typo in skills database. Scouts shot range set at 20 instead of 200
2. how do i turn the bot resserection system off/on sometimes i dont want it
1. typo in skills database. Scouts shot range set at 20 instead of 200
2. how do i turn the bot resserection system off/on sometimes i dont want it
Re: RoM bot
First post has v2.32 still.Administrator wrote:Updated to 2.33.
- Administrator
- Site Admin
- Posts: 5307
- Joined: Sat Jan 05, 2008 4:21 pm
Re: RoM bot
Remove your return path in your profile. That should disable it.someone wrote:2 things:
2. how do i turn the bot resserection system off/on sometimes i dont want it
Re: RoM bot
Remove your return path in your profile. That should disable it.[/quote]
i just realized i havent been updating my profile with the new stuff you have added like
leave combat and ondeath. So i dont actually know which part to change.
i just realized i havent been updating my profile with the new stuff you have added like
leave combat and ondeath. So i dont actually know which part to change.
- Administrator
- Site Admin
- Posts: 5307
- Joined: Sat Jan 05, 2008 4:21 pm
Re: RoM bot
None of that maters. You're looking at the RETURNPATH option. Do you have something like this in your profile?someone wrote: i just realized i havent been updating my profile with the new stuff you have added like
leave combat and ondeath. So i dont actually know which part to change.
Code: Select all
<option name="RETURNPATH" value="fungus_return.xml" />
What you should do, though, is have the bot pause when you die. Just add this segment in your profile to do that:
Code: Select all
<onDeath>
-- Additional Lua code to execute on death
pauseOnDeath(); -- Stop the script
</onDeath>
-
- Posts: 27
- Joined: Mon Mar 23, 2009 4:49 am
Re: RoM bot
Can not find any commands to target the npc as of yet, not really sure What Im looking for.
But did find a way to buy items from the npc once the store is open.
/script StoreBuyItem(3, 50);
That will buy 50 items of the third item
Count go's like this.
12
34
56
yx
And so on
But did find a way to buy items from the npc once the store is open.
/script StoreBuyItem(3, 50);
That will buy 50 items of the third item
Count go's like this.
12
34
56
yx
And so on
Who is online
Users browsing this forum: Ahrefs [Bot], Google [Bot], Semrush [Bot] and 1 guest