NoobBotter's Kashaylan Research Expert EoJ Script

[lisa]

Seems I have the wrong end message anyway if it succeeds, that message if it the event ends from time limit.

--=== Added ===--

Fixed my posted code to look for fail or succeed message.

[Miworax]

:D iam waiting for noobbotter i hope he can fix the script... i need this

[Miworax]

dont know... in Chrysalia the EoJ quest / or botter had no problems with it... maybe we can get something out of this script

we just need to say, after he finished channel 3... Change to channel 1 and wait for message.

Can someone write this ? i tryed much hours and dont get it

[Miworax]

No ideas ?

Nobody can write this ? thats too bad for me

[Bat90]

For me the bot does the quest fine but when it needs to switch the channel he just keep to do the quest, then i must stop the bot and switch the channel manualy. I dont know where is the problem "by me" because as i can see for others its working with the switching. Please help some1

[Braziliano]

care with the hours , they track how many times you turn in on a daily basis , just like they did with the previous event with 'Tokens' , few hours a day should be plently full if u spread your characters out on all channels in different zones

[Bat90]

1.Lets start bot on ch1 when event starts-- he does that ch1 and says wait until next round,
2.The new round starts on ch1 again-- he does the event on ch1 and switch on ch2,
3.Switched on ch2--- does the ch2 and switch on ch3,
4. Switched on ch3--- does the ch3 and go back at ch1
5. Switched on ch1 --- here is he suposed to wait until next event but instead of waiting next event for some unknown reason it says xxxx minutes until next event starts...changing channel and then he trys to change form ch1 to ch2. While going from ch1 to ch2 at 10th second or so switching gets break and he remains on ch1, but the channels got buggy and cant switch anymore until i do relog. If i only could remowe this problem the bot would work like a charm ^^

I downloaded the last code where noobbotter posted on this forum saying:
"Let me know if this one works as I am unable to test it right now."
Here is the code so you dont need to go back and search for it

[Bat90]

Sry i forgot to post the link of mm picture

[noobbotter]

ok, Bat90, I think I may have found the problem. Try this one and let me know what it does. (fingers crossed)

ResearchExpertEOJ.xml

version 1.8a

(11.89 KiB) Downloaded 415 times

[Bat90]

Problem again

[BlubBlab]

Problem again

It means that the code inside the waypoint is not valid. Does the happend all the time or only sometimes?

[Bat90]

Last researchexpertEoj was working fine since the new one that noobbotter sent, and everytime when i start the new one that message apears for other waypoints its ok.

[noobbotter]

I found a spot where I missed an end for an if statement. Try this one and let me know how it woks.

ResearchExpertEOJ.xml

rev 1.8a

(11.9 KiB) Downloaded 435 times

[Bat90]

Ok here is ti how it works now:
I started the bot on ch1, he has done it, and normaly he would now wait for next round again on ch1 , but instead of that he moves on ch2, then on ch3, then again on ch1 and so on, like a loop. He doesnt do anything on channels just keep switching, and it seems the time till new event starts is incorect as well how much i gained Eoj (0 it says ) on that ch and time needed to finish the round.
Here is the pic take a look :

[noobbotter]

Ok, I think I had to remove a "break" because the check to go to next channel during round is no longer within the 2nd level repeat. Try this one.

ResearchExpertEOJ.xml

rev 1.8b

(11.88 KiB) Downloaded 419 times

[Bat90]

I think its the same thing again

[noobbotter]

ok, I'm going to have to play with this at home tonight and see if I can figure out what's going on.

[Bat90]

Ok, hope you will figure it out where the problem is ^^

[noobbotter]

I think I found the loop that was causing the endless channel changing. Try this one and let me know.

ResearchExpertEOJ.xml

ver 1.8c

(12.18 KiB) Downloaded 421 times

[Bat90]

Started at ch1, done the ch1 and he waits for new round on ch1 (its strange that he says waiting for the next round and immediatly after that it says event has started then he do the quest once and says round took 0,0666 minutes 0 EoJ earned , curent energy time till next round 19,9 minutes and then waits for the next round on ch1) i post the picture so you can better see it on MMpic3), i think this is not problem till he waits for another round on ch1 but maybe its causing problem in the next channels thought.

Then the new round on ch1 comes and he does it again, and i post the picture of the end of ch1 new round --->picture : MMpic1,

He switches from ch1 to ch2 and does the event there and sudenly he changes back to ch1 ---> picture MMpic2