RoM Harvest - Revision history

Elverion: Undo revision 1022 by 188.143.232.12 (Talk)

2012-07-19T07:43:29Z

Undo revision 1022 by 188.143.232.12 (Talk)

188.143.232.12: WGBTYUDdbjmpF

2012-07-08T20:20:45Z

WGBTYUDdbjmpF

Elverion at 21:25, 22 July 2011

2011-07-22T21:25:00Z

64.8.69.51: xrWESOEIyonIuYgmbE

2011-07-21T15:15:30Z

xrWESOEIyonIuYgmbE

194.228.3.29: SYtYvYYkPNKod

2011-07-20T15:49:56Z

SYtYvYYkPNKod

190.198.18.253: Undo revision 592 by Elverion (Talk)

2011-07-20T01:52:53Z

Undo revision 592 by Elverion (Talk)

Elverion: /* Expert profile options to configure the harvesting scan procress */

2010-12-03T21:24:29Z

‎Expert profile options to configure the harvesting scan procress

Elverion: /* Harvesting with the RoM Bot */

2010-12-03T20:38:33Z

‎Harvesting with the RoM Bot

130.245.198.248: /* Later editing of your harvesting path */

2010-08-03T16:53:52Z

‎Later editing of your harvesting path

95.115.43.206: /* Create a harvesting waypoint file */

2009-10-26T23:25:55Z

‎Create a harvesting waypoint file

← Older revision		Revision as of 07:43, 19 July 2012
Line 1:		Line 1:
−	~~Wykaz właścicieli majątku Antonowo~~:1.~~Majątek Antonowo własność mahometańskiej rozidny Chasiniewiczf3w~~, ~~Aleksander Chasień syn Jakuba szlachcic wyzn~~, ~~mahometańskiego~~ (~~1889r~~.)2.~~Mikołaja~~ ~~Łonginowa syna Grzegorza Rosjanin3~~.~~Antoni Achrem – Achremowicz syn Wincentego Polak~~, ~~katolik~~ ~~Kupno Antonowa 01~~.02.~~1911 r~~. ~~Pozdrawiam~~: ~~Zbyszek~~	+	= Harvesting with the RoM Bot =
		+
		+	There are a few things you should know about harvesting with the RoM Bot:
		+	* You have to create your own harvesting waypoint files. That means you have to run to every resource node and save the position of each node.
		+	* Harvesting does not, currently, check skill level verse harvest difficulty before attempting to harvest. That is, if you have a Wood cutting level 1 and have a harvest point near a level 50 wood, it will still attempt to harvest it.
		+
		+	= Create a harvesting waypoint file =
		+	Start waypoint creator script:
		+	<source lang="lua">rom/createpath.lua</source>
		+	You could also start the creator with a forced profile:
		+	<source lang="lua">rom/createpath.lua profile:l1-10</source>
		+	Now walk to every node, you want later to harvest and press NUM-2. That will save the position of the node and insert the harvest command within the waypoint file. After all nodes, save the file by pressing the NUM-3 button and enter a name (e.g. harvest1-8).
		+
		+	Your waypoint file will look like:
		+	<source lang="xml"><waypoints>
		+	<!-- # 1 --><waypoint x="-6541" z="4937"></waypoint>
		+	<!-- # 2 --><waypoint x="-6390" z="5210">player:harvest();</waypoint>
		+	<!-- # 3 --><waypoint x="-6421" z="5317">player:harvest();</waypoint>
		+	<!-- # 4 --><waypoint x="-6281" z="5408"></waypoint>
		+	</waypoints>
		+	</source>
		+	Add the waypoint type="TRAVEL" to your waypoint file, if you don't want to target mobs while harvesting:
		+	<source lang="xml"><waypoints type="TRAVEL">
		+	<!-- # 1 --><waypoint x="-6541" z="4937"></waypoint>
		+	<!-- # 2 --><waypoint x="-6390" z="5210">player:harvest();</waypoint>
		+	...</source>
		+
		+	= The player:harvest() command =
		+
		+	The waypoint file creator 'createpath.lua' will insert the harvesting command into your waypoint file:
		+	player:harvest();
		+	You use 'player:harvest()' to scan that waypoint for a harverst node and harvest that (at the moment only working if the RoM window is in foreground). If you only want to gather ressources, there is no need to change anything.
		+
		+	There is a special use of the function, if you want to 'havest' special objects like daily quest items.
		+	player:harvest(["test"\|id]);
		+	Use 'player:harvest("test")' to list id's of objects in front of you (e.g. quest objects), use 'player:harvest(id-nr)' to scan and use/open a object with that given object-id.
		+
		+	= Start the bot with your harvesting path =
		+	You can insert the harvesting file within your profile or start the bot directly with your forced new waypoint file:
		+	<source lang="lua">rom/bot.lua path:harvest1-8</source>
		+	= Later editing of your harvesting path =
		+	If you want to change your harvesting path, add new nodes or change the position of node, it is recommended to start a second MM window with the createpath script. By doing that, you can edit the waypoint file, while you are using it at the same time in the bot. You also should use an editor with automatic line numbering like [http://www.textpad.com/download/ Textpad].
		+
		+	Use the RoM ingame addon [http://rom.curse.com/downloads/rom-addons/details/ygather.aspx ygather] if you want to remember all available node. Just let the bot run a view rounds around new areas. ygather will remember all nodes around and show them at the map/minimap. You can now create a waypoint file, that also includes the nodes, that are not available at the moment.
		+
		+	= Profile options to configure the harvesting scan process =
		+	There are a few harvest options which you can configure in your profile that allow you to set exactly which nodes you wish to harvest. More detailed information can be found in the [[RoM_Configuration#Profile_-_Options \| Profile Options]] wiki page.

← Older revision		Revision as of 20:20, 8 July 2012
Line 1:		Line 1:
−	~~= Harvesting with the RoM Bot =~~	+	Wykaz właścicieli majątku Antonowo:1.Majątek Antonowo własność mahometańskiej rozidny Chasiniewiczf3w, Aleksander Chasień syn Jakuba szlachcic wyzn, mahometańskiego (1889r.)2.Mikołaja Łonginowa syna Grzegorza Rosjanin3.Antoni Achrem – Achremowicz syn Wincentego Polak, katolik Kupno Antonowa 01.02.1911 r. Pozdrawiam: Zbyszek
−
−	~~There are a few things you should know about harvesting with the RoM Bot~~:
−	* You have to create your own harvesting waypoint files. That means you have to run to every resource node and save the position of each node.
−	* Harvesting does not, currently, check skill level verse harvest difficulty before attempting to harvest. That is, if you have a Wood cutting level 1 ~~and have a harvest point near a level 50 wood, it will still attempt to harvest it.~~
−
−	~~= Create a harvesting waypoint file =~~
−	~~Start waypoint creator script:~~
−	~~<source lang="lua">rom/createpath.lua</source>~~
−	~~You could also start the creator with a forced profile:~~
−	~~<source lang="lua">rom/createpath~~.~~lua profile:l1-10</source>~~
−	~~Now walk to every node~~, ~~you want later to harvest and press NUM-2. That will save the position of the node and insert the harvest command within the waypoint file. After all nodes~~, ~~save the file by pressing the NUM-3 button and enter a name~~ (e.~~g. harvest1-8).~~
−
−	~~Your waypoint file will look like:~~
−	~~<source lang="xml"><waypoints>~~
−	~~<!-- # 1 --><waypoint x="-6541" z="4937"></waypoint>~~
−	~~<!-- # 2 --><waypoint x="-6390" z="5210">player:harvest(~~)~~;</waypoint>~~
−	~~<!-- # 3 --><waypoint x="-6421" z="5317">player:harvest();</waypoint>~~
−	~~<!-- # 4 --><waypoint x="-6281" z="5408"></waypoint>~~
−	~~</waypoints>~~
−	~~</source>~~
−	~~Add the waypoint type="TRAVEL" to your waypoint file, if you don't want to target mobs while harvesting:~~
−	~~<source lang="xml"><waypoints type="TRAVEL">~~
−	~~<!-- # 1 --><waypoint x="-6541" z="4937"></waypoint>~~
−	~~<!-- #~~ 2 ~~--><waypoint x="-6390" z="5210">player:harvest();</waypoint>~~
−	...~~</source>~~
−
−	~~= The player:harvest() command =~~
−
−	~~The waypoint file creator 'createpath.lua' will insert the harvesting command into your waypoint file:~~
−	~~player:harvest();~~
−	~~You use 'player:harvest()' to scan that waypoint for a harverst node and harvest that (at the moment only working if the RoM window is in foreground)~~. ~~If you only want to gather ressources~~, ~~there is no need to change anything.~~
−
−	~~There is a special use of the function, if you want to 'havest' special objects like daily quest items.~~
−	~~player:harvest(["test"\|id]);~~
−	~~Use 'player:harvest("test")' to list id's of objects in front of you (e.g. quest objects), use 'player:harvest(id-nr)' to scan and use/open a object with that given object-id.~~
−
−	~~= Start the bot with your harvesting path =~~
−	~~You can insert the harvesting file within your profile or start the bot directly with your forced new waypoint file:~~
−	~~<source lang="lua">rom/bot.lua path:harvest1-8</source>~~
−	~~= Later editing of your harvesting path =~~
−	If you want to change your harvesting path, add new nodes or change the position of node, it is recommended to start a second MM window with the createpath script. By doing that, you can edit the waypoint file, while you are using it at the same time in the bot. You also should use an editor with automatic line numbering like [http://www.~~textpad~~.~~com/download/ Textpad]~~.
−
−	~~Use the RoM ingame addon [http~~://rom.curse.com/downloads/rom-addons/details/ygather.aspx ygather] if you want to remember all available node. Just let the bot run a view rounds around new areas. ygather will remember all nodes around and show them at the map/minimap. You can now create a waypoint file, that also includes the nodes, that are not available at the moment.
−
−	~~= Profile options to configure the harvesting scan process =~~
−	There are a few harvest options which you can configure in your profile that allow you to set exactly which nodes you wish to harvest. More detailed information can be found in the [[RoM_Configuration#Profile_-_Options \| Profile Options]] wiki page.

← Older revision		Revision as of 21:25, 22 July 2011
Line 1:		Line 1:
−	Now ~~I'm~~ like, ~~well duh~~! ~~Truly tahnfkul~~ for your ~~help~~.	+	= Harvesting with the RoM Bot =
		+
		+	There are a few things you should know about harvesting with the RoM Bot:
		+	* You have to create your own harvesting waypoint files. That means you have to run to every resource node and save the position of each node.
		+	* Harvesting does not, currently, check skill level verse harvest difficulty before attempting to harvest. That is, if you have a Wood cutting level 1 and have a harvest point near a level 50 wood, it will still attempt to harvest it.
		+
		+	= Create a harvesting waypoint file =
		+	Start waypoint creator script:
		+	<source lang="lua">rom/createpath.lua</source>
		+	You could also start the creator with a forced profile:
		+	<source lang="lua">rom/createpath.lua profile:l1-10</source>
		+	Now walk to every node, you want later to harvest and press NUM-2. That will save the position of the node and insert the harvest command within the waypoint file. After all nodes, save the file by pressing the NUM-3 button and enter a name (e.g. harvest1-8).
		+
		+	Your waypoint file will look like:
		+	<source lang="xml"><waypoints>
		+	<!-- # 1 --><waypoint x="-6541" z="4937"></waypoint>
		+	<!-- # 2 --><waypoint x="-6390" z="5210">player:harvest();</waypoint>
		+	<!-- # 3 --><waypoint x="-6421" z="5317">player:harvest();</waypoint>
		+	<!-- # 4 --><waypoint x="-6281" z="5408"></waypoint>
		+	</waypoints>
		+	</source>
		+	Add the waypoint type="TRAVEL" to your waypoint file, if you don't want to target mobs while harvesting:
		+	<source lang="xml"><waypoints type="TRAVEL">
		+	<!-- # 1 --><waypoint x="-6541" z="4937"></waypoint>
		+	<!-- # 2 --><waypoint x="-6390" z="5210">player:harvest();</waypoint>
		+	...</source>
		+
		+	= The player:harvest() command =
		+
		+	The waypoint file creator 'createpath.lua' will insert the harvesting command into your waypoint file:
		+	player:harvest();
		+	You use 'player:harvest()' to scan that waypoint for a harverst node and harvest that (at the moment only working if the RoM window is in foreground). If you only want to gather ressources, there is no need to change anything.
		+
		+	There is a special use of the function, if you want to 'havest' special objects like daily quest items.
		+	player:harvest(["test"\|id]);
		+	Use 'player:harvest("test")' to list id's of objects in front of you (e.g. quest objects), use 'player:harvest(id-nr)' to scan and use/open a object with that given object-id.
		+
		+	= Start the bot with your harvesting path =
		+	You can insert the harvesting file within your profile or start the bot directly with your forced new waypoint file:
		+	<source lang="lua">rom/bot.lua path:harvest1-8</source>
		+	= Later editing of your harvesting path =
		+	If you want to change your harvesting path, add new nodes or change the position of node, it is recommended to start a second MM window with the createpath script. By doing that, you can edit the waypoint file, while you are using it at the same time in the bot. You also should use an editor with automatic line numbering like [http://www.textpad.com/download/ Textpad].
		+
		+	Use the RoM ingame addon [http://rom.curse.com/downloads/rom-addons/details/ygather.aspx ygather] if you want to remember all available node. Just let the bot run a view rounds around new areas. ygather will remember all nodes around and show them at the map/minimap. You can now create a waypoint file, that also includes the nodes, that are not available at the moment.
		+
		+	= Profile options to configure the harvesting scan process =
		+	There are a few harvest options which you can configure in your profile that allow you to set exactly which nodes you wish to harvest. More detailed information can be found in the [[RoM_Configuration#Profile_-_Options \| Profile Options]] wiki page.

← Older revision		Revision as of 15:15, 21 July 2011
Line 1:		Line 1:
−	~~And~~ I ~~was just wondierng about that too~~!	+	Now I'm like, well duh! Truly tahnfkul for your help.

← Older revision		Revision as of 15:49, 20 July 2011
Line 1:		Line 1:
−	~~Ah, i see. Well~~ that~~'s not~~ too ~~tcriky at all~~!"	+	And I was just wondierng about that too!

← Older revision		Revision as of 01:52, 20 July 2011
Line 1:		Line 1:
−	~~= Harvesting with the RoM Bot =~~	+	Ah, i see. Well that's not too tcriky at all!"
−
−	~~There are a few things you should know about harvesting with the RoM Bot:~~
−	* You have to create your own harvesting waypoint files. That means you have to run to every resource node and save the position of each node.
−	* Harvesting does not, currently, check skill level verse harvest difficulty before attempting to harvest. That is, if you have a Wood cutting level 1 and have a harvest point near a level 50 wood, it will still attempt to harvest it.
−
−	~~= Create a harvesting waypoint file =~~
−	~~Start waypoint creator script:~~
−	~~<source lang="lua">rom/createpath.lua</source>~~
−	~~You could also start the creator with a forced profile:~~
−	~~<source lang="lua">rom/createpath.lua profile:l1-10</source>~~
−	~~Now walk to every node, you want later to harvest and press NUM-2. That will save the position of the node and insert the harvest command within the waypoint file. After all nodes~~, ~~save the file by pressing the NUM-3 button and enter a name (e.g. harvest1-8)~~.
−
−	~~Your waypoint file will look like:~~
−	~~<source lang="xml"><waypoints>~~
−	~~<!-- # 1 --><waypoint x="-6541" z="4937"></waypoint>~~
−	~~<!-- # 2 --><waypoint x="-6390" z="5210">player:harvest();</waypoint>~~
−	~~<!-- # 3 --><waypoint x="-6421" z="5317">player:harvest();</waypoint>~~
−	~~<!-- # 4 --><waypoint x="-6281" z="5408"></waypoint>~~
−	~~</waypoints>~~
−	~~</source>~~
−	~~Add the waypoint type="TRAVEL" to your waypoint file, if you don't want to target mobs while harvesting:~~
−	~~<source lang="xml"><waypoints type="TRAVEL">~~
−	~~<!-- # 1 --><waypoint x="-6541" z="4937"></waypoint>~~
−	~~<!-- # 2 --><waypoint x="-6390" z="5210">player:harvest();</waypoint>~~
−	~~...</source>~~
−
−	~~= The player:harvest() command =~~
−
−	~~The waypoint file creator 'createpath.lua' will insert the harvesting command into your waypoint file:~~
−	~~player:harvest();~~
−	~~You use 'player:harvest()' to scan that waypoint for a harverst node and harvest~~ that ~~(at the moment only working if the RoM window is in foreground). If you only want to gather ressources, there is no need to change anything.~~
−
−	~~There is a special use of the function, if you want to 'havest' special objects like daily quest items.~~
−	~~player:harvest(["test"\|id]);~~
−	~~Use 'player:harvest("test")' to list id~~'s ~~of objects in front of you (e.g. quest objects), use 'player:harvest(id-nr)' to scan and use/open a object with that given object-id.~~
−
−	~~= Start the bot with your harvesting path =~~
−	~~You can insert the harvesting file within your profile or start the bot directly with your forced new waypoint file:~~
−	~~<source lang="lua">rom/bot.lua path:harvest1-8</source>~~
−	~~= Later editing of your harvesting path =~~
−	If you want to change your harvesting path, add new nodes or change the position of node, it is recommended to start a second MM window with the createpath script. By doing that, you can edit the waypoint file, while you are using it at ~~the same time in the bot. You also should use an editor with automatic line numbering like [http://www.textpad.com/download/ Textpad].~~
−
−	~~Use the RoM ingame addon [http://rom.curse.com/downloads/rom-addons/details/ygather.aspx ygather] if you want to remember~~ all available node. Just let the bot run a view rounds around new areas. ygather will remember all nodes around and show them at the map/minimap. You can now create a waypoint file, that also includes the nodes, that are not available at the moment.
−
−	~~= Profile options to configure the harvesting scan process =~~
−	There are a few harvest options which you can configure in your profile that allow you to set exactly which nodes you wish to harvest. More detailed information can be found in the [[RoM_Configuration#Profile_-_Options \| Profile Options]] wiki page.

@@ Line 44: / Line 44: @@
 Use the RoM ingame addon [http://rom.curse.com/downloads/rom-addons/details/ygather.aspx ygather] if you want to remember all available node. Just let the bot run a view rounds around new areas. ygather will remember all nodes around and show them at the map/minimap. You can now create a waypoint file, that also includes the nodes, that are not available at the moment.
-= Expert profile options to configure the harvesting scan procress =
+= Profile options to configure the harvesting scan process =
-You can enter the following option within your profile to configure the scan process to you needs. If is in general recommended to move the camera view beetwen a medium and far distance.
+There are a few harvest options which you can configure in your profile that allow you to set exactly which nodes you wish to harvest. More detailed information can be found in the [[RoM_Configuration#Profile_-_Options | Profile Options]] wiki page.

@@ Line 2: / Line 2: @@
 There are a few things you should know about harvesting with the RoM Bot:
 * You have to create your own harvesting waypoint files. That means you have to run to every resource node and save the position of each node.
 = Create a harvesting waypoint file =

@@ Line 40: / Line 40: @@
 <source lang="lua">rom/bot.lua path:harvest1-8</source>
 = Later editing of your harvesting path =
-If you want to change your harvesting path, add new nodes or change the position of node, it is recommended to start a second MM window with the createopath script. By doing that, you can edit the waypoint file, while you are using it at the same time in the bot. You also should use an editor with automatic line numbering like [http://www.textpad.com/download/ Textpad].
+If you want to change your harvesting path, add new nodes or change the position of node, it is recommended to start a second MM window with the createpath script. By doing that, you can edit the waypoint file, while you are using it at the same time in the bot. You also should use an editor with automatic line numbering like [http://www.textpad.com/download/ Textpad].
 Use the RoM ingame addon [http://rom.curse.com/downloads/rom-addons/details/ygather.aspx ygather] if you want to remember all available node. Just let the bot run a view rounds around new areas. ygather will remember all nodes around and show them at the map/minimap. You can now create a waypoint file, that also includes the nodes, that are not available at the moment.
 = Expert profile options to configure the harvesting scan procress =

@@ Line 8: / Line 8: @@
 Start waypoint creator script:
 <source lang="lua">rom/createpath.lua</source>
 Now walk to every node, you want later to harvest and press NUM-2. That will save the position of the node and insert the harvest command within the waypoint file. After all nodes, save the file by pressing the NUM-3 button and enter a name (e.g. harvest1-8).