ok works but i have the question.Which is the command for enter in ini with alt, wait leader and follow him continuosly? I need command for leader too for check when alt is in party and wait start xml when him is inside ini.tyAdministrator wrote: ↑Thu Jul 29, 2021 3:08 pm As I suspected, that script uses the old addresses structure. I just pushed up a commit on Github to add a compatibility layer for the loading byte; go ahead and update (Download zip from here, use the RoM bot updater tool, or run rom-bot/gitupdate) and it should work again (assuming that there's no other issues).
I also made a change to the logo; the script will try to upgrade you to code page 65001 (UTF-8) if it can so you may be able to see the new logo text. If not, there's still a fallback mode that isn't as pretty, but it sure beats the alphabet-puke from before.
Version 7.4.0.2897 progress
Re: Version 7.4.0.2897 progress
- Administrator
- Site Admin
- Posts: 5312
- Joined: Sat Jan 05, 2008 4:21 pm
Re: Version 7.4.0.2897 progress
viewtopic.php?f=21&t=4402&hilit=party+bot
Looks like you'd want the leader to do this:
Looks like you'd want the leader to do this:
Code: Select all
sendPartyChat('com"portal"') -- Tell party to enter the portal
-- do something to enter the portal yourself
waitForLoadingScreen(60) -- Wait for loading screen to finish
yrest(10000); -- Rest 10 seconds to wait for rest of party to finish loading, just in case
sendPartyChat('com"follow"') -- Tell party to follow
Re: Version 7.4.0.2897 progress
leader waypoint works .....but idon't like him write in party chat cause gm can see command i think.is there a way for use another command to tell party " go in"?Administrator wrote: ↑Sat Jul 31, 2021 10:17 am viewtopic.php?f=21&t=4402&hilit=party+bot
Looks like you'd want the leader to do this:Code: Select all
sendPartyChat('com"portal"') -- Tell party to enter the portal -- do something to enter the portal yourself waitForLoadingScreen(60) -- Wait for loading screen to finish yrest(10000); -- Rest 10 seconds to wait for rest of party to finish loading, just in case sendPartyChat('com"follow"') -- Tell party to follow
also i have a problem, i used "gotoportal "function on partyhealer( cause alt just follow leader), this script works when alt need to enter inside but usually he blocked in front of portal cause maybe i have a lag.....i have this on mm windows :
Loaded waypoint path partyhealer.xml
sometimes enter and sometimes notNo return path with default naming partyhealer_return.xml found.
We use the normal waypoint path partyhealer.xml now.
Party Monitor started.
Party member 1 has the name of xxxxxxx
Targeting portal 106138, range 31.632482825625
when alt needs to go out and i use the same cooand for enter ("go in " from leader) bot don't move.and i need to do manually.
is there another command for tell alt just follow and enter in portal when leader said "go" or i need to do manually waypoint for it?ty
Re: Version 7.4.0.2897 progress
i used function in xml:
--inventory:useItem(202435) -- home sweet home standard
but him not use anything ..someone can help me ?rombot windows say me installe code
--inventory:useItem(202435) -- home sweet home standard
but him not use anything ..someone can help me ?rombot windows say me installe code
- Administrator
- Site Admin
- Posts: 5312
- Joined: Sat Jan 05, 2008 4:21 pm
Re: Version 7.4.0.2897 progress
No, not that I am aware of.
Not without rewriting a whole bunch of code, no. You would need to somehow detect if and when the followers should change their behaviour. I guess one thing you could do is check if the leader isn't available, and you're close enough to a portal, then enter the portal. But again, that would require some modification of the follower code, and would end up being hyper-specific to your use case.is there another command for tell alt just follow and enter in portal when leader said "go" or i need to do manually waypoint for it?ty
You need to remove the first -- in front of that line. The "--" tells it to not actually run that code. The 2nd "--" is fine, since that isn't code to run and is just meant to be a comment so you can ignore that one.--inventory:useItem(202435) -- home sweet home standard
Unrelated to the question you just asked, but I did just push up a code change that could be useful for detecting whether or not all party members have entered the instance. You could put something like this in your leader's waypoints, for example:
Code: Select all
waitForObjects({"Alice", "Bob", "Eve"}, 120); -- Waits for Alice, Bob, and Eve to appear nearby before continuing. If this takes longer than 120 seconds, continue on without them.
Re: Version 7.4.0.2897 progress
ok ty i will try it .....all works when i enter , but there is a problem when him (alt) need to leave ini.........anyway i weill tell you tomorrow i thinkAdministrator wrote: ↑Fri Aug 13, 2021 11:59 amNo, not that I am aware of.
Not without rewriting a whole bunch of code, no. You would need to somehow detect if and when the followers should change their behaviour. I guess one thing you could do is check if the leader isn't available, and you're close enough to a portal, then enter the portal. But again, that would require some modification of the follower code, and would end up being hyper-specific to your use case.is there another command for tell alt just follow and enter in portal when leader said "go" or i need to do manually waypoint for it?ty
You need to remove the first -- in front of that line. The "--" tells it to not actually run that code. The 2nd "--" is fine, since that isn't code to run and is just meant to be a comment so you can ignore that one.--inventory:useItem(202435) -- home sweet home standard
Unrelated to the question you just asked, but I did just push up a code change that could be useful for detecting whether or not all party members have entered the instance. You could put something like this in your leader's waypoints, for example:Code: Select all
waitForObjects({"Alice", "Bob", "Eve"}, 120); -- Waits for Alice, Bob, and Eve to appear nearby before continuing. If this takes longer than 120 seconds, continue on without them.
Re: Version 7.4.0.2897 progress
ei m8 can you check if balu dailies works?char can't click on 3 bottles in balu village for complete an old daily quest "research expert" ......
We successfully target NPC Jenn Shadoli and try to open the dialog window.
We found Yellow Liquid and will harvest it.
Codemod not installed
We found Flask and will harvest it.
Codemod not installed
We found Cloudy Liquid and will harvest it.
Codemod not installed
Re: Version 7.4.0.2897 progress
seems it changes something when game update ...can you check pls ?Administrator wrote: ↑Fri Aug 13, 2021 11:59 amNo, not that I am aware of.
Not without rewriting a whole bunch of code, no. You would need to somehow detect if and when the followers should change their behaviour. I guess one thing you could do is check if the leader isn't available, and you're close enough to a portal, then enter the portal. But again, that would require some modification of the follower code, and would end up being hyper-specific to your use case.is there another command for tell alt just follow and enter in portal when leader said "go" or i need to do manually waypoint for it?ty
You need to remove the first -- in front of that line. The "--" tells it to not actually run that code. The 2nd "--" is fine, since that isn't code to run and is just meant to be a comment so you can ignore that one.--inventory:useItem(202435) -- home sweet home standard
Unrelated to the question you just asked, but I did just push up a code change that could be useful for detecting whether or not all party members have entered the instance. You could put something like this in your leader's waypoints, for example:Code: Select all
waitForObjects({"Alice", "Bob", "Eve"}, 120); -- Waits for Alice, Bob, and Eve to appear nearby before continuing. If this takes longer than 120 seconds, continue on without them.
Re: Version 7.4.0.2897 progress
I don't know if it has something to do with it but I installed kitty combo and I was trying the combinations of skills, I noticed that, although the program uses this function, the skills are activated by clicking several times on the macro created to make the program work ... I have I removed all the addons and I removed the configurations of the character in the documents folder .... It works for other people but not to me ... is it possible that windows has an important role in the use of macros and programs? that any version of kitty does not work with the factory settings of runes. Tips?
- Administrator
- Site Admin
- Posts: 5312
- Joined: Sat Jan 05, 2008 4:21 pm
Re: Version 7.4.0.2897 progress
I pushed up a couple updates today, one of which may fix your quest issue. I would suggest updating and retesting.
Re: Version 7.4.0.2897 progress
i will do, but can you check what i said you in pm or here about kitty and diyce pls?Administrator wrote: ↑Thu Aug 26, 2021 3:57 pm I pushed up a couple updates today, one of which may fix your quest issue. I would suggest updating and retesting.
Re: Version 7.4.0.2897 progress
ok i'm testing but seems not works properly, anyway i will retry but i have a question:Administrator wrote: ↑Thu Aug 26, 2021 3:57 pm I pushed up a couple updates today, one of which may fix your quest issue. I would suggest updating and retesting.
is there a way for the priest or druid to target a specific player and use in sequence the skills I want? for example to use the priest, how can I tell him to focus on a specific player? i saw in partyhealer the focu priest only on the leader but i want to focus on another player, can i add a specific name? and if so how can I tell him to use skills in sequence that I want? Thank you
- Administrator
- Site Admin
- Posts: 5312
- Joined: Sat Jan 05, 2008 4:21 pm
Re: Version 7.4.0.2897 progress
Probably something like
Code: Select all
local other = player:findNearestNameOrId("Other player name goes here");
if( other ) then
player:target(other);
-- whatever you want to do after targeting the player goes here
end
Re: Version 7.4.0.2897 progress
I have noticed, that the bot doesn't use MP potions, or MP phirius potions.
It will bring the following error:
DEBUG - Cannot use item Divine Magic Stone BagId: #88 ItemCount: 70 reason: In Use
Phirius potions doesnt show any error, they are just never used.
It can use HP poton (Hundred Grass Essence) without any issue, just not the MP potions.
It will bring the following error:
DEBUG - Cannot use item Divine Magic Stone BagId: #88 ItemCount: 70 reason: In Use
Phirius potions doesnt show any error, they are just never used.
It can use HP poton (Hundred Grass Essence) without any issue, just not the MP potions.
- Administrator
- Site Admin
- Posts: 5312
- Joined: Sat Jan 05, 2008 4:21 pm
Re: Version 7.4.0.2897 progress
Just pushed up a fix that should address this. Can you test it out and see if your issues are resolved? You'll just need to update your scripts and you should be good to go.
Re: Version 7.4.0.2897 progress
Thanks, seems to work now with mana pots.
-
- Posts: 15
- Joined: Wed Dec 25, 2019 12:54 pm
Re: Version 7.4.0.2897 progress
Hallo zusammen,
es lief so gut...und nun nimmt er bei der TQ im Hügelland von Fartisan nicht mehr jeden
stabilisierenden Talisman.
Aber bis jetzt war es so, das nach dem einspielen eines Patches von unserem tollen Admin alles wieder lief.
Liebe Grüße und besten Dank für die tolle Arbeit
man sagt es viel zu selten
es lief so gut...und nun nimmt er bei der TQ im Hügelland von Fartisan nicht mehr jeden
stabilisierenden Talisman.
Aber bis jetzt war es so, das nach dem einspielen eines Patches von unserem tollen Admin alles wieder lief.
Liebe Grüße und besten Dank für die tolle Arbeit
man sagt es viel zu selten
- Administrator
- Site Admin
- Posts: 5312
- Joined: Sat Jan 05, 2008 4:21 pm
Re: Version 7.4.0.2897 progress
I'm not entirely certain what you're asking here. If a previous version of the scripts worked better, you can always install exactly that version.Tuedennuegel wrote: ↑Sat Sep 18, 2021 8:28 pm Hallo zusammen,
es lief so gut...und nun nimmt er bei der TQ im Hügelland von Fartisan nicht mehr jeden
stabilisierenden Talisman.
Aber bis jetzt war es so, das nach dem einspielen eines Patches von unserem tollen Admin alles wieder lief.
Liebe Grüße und besten Dank für die tolle Arbeit
man sagt es viel zu selten
Here's the list of every change made:
https://github.com/SolarStrike-Software ... its/master
Find the version that worked best for you (probably just go by date). Then, click the "< >" button to the right of it.
On that page, go to Code->Download ZIP: Unzip the files, then copy/paste and overwrite your files with that version.
-
- Posts: 15
- Joined: Wed Dec 25, 2019 12:54 pm
Re: Version 7.4.0.2897 progress
Lieben Dank für die Antwort.
Ich werde Ihren Vorschlag ausprobieren.
Es ist ja nicht schlimmes passiert....und meist
ist es nur eine Frage der Zeit wann Sie eine Aktualisierung
herausbringen und schon klappt wieder alles.
Gruß
Tuedi
Ich werde Ihren Vorschlag ausprobieren.
Es ist ja nicht schlimmes passiert....und meist
ist es nur eine Frage der Zeit wann Sie eine Aktualisierung
herausbringen und schon klappt wieder alles.
Gruß
Tuedi
- Administrator
- Site Admin
- Posts: 5312
- Joined: Sat Jan 05, 2008 4:21 pm
Re: Version 7.4.0.2897 progress
You've definitely got something out of date. Compare your version of userfunction_swimhack to this one: https://github.com/SolarStrike-Software ... imhack.lua
Also, what happens if you run this:
Also, what happens if you run this:
Code: Select all
rom-bot/addrtest
Who is online
Users browsing this forum: Ahrefs [Bot] and 68 guests