Holic bot

You may request or share scripts for MicroMacro in this forum.
Message
Author
DocKy
Posts: 2
Joined: Wed Dec 24, 2008 6:26 am

New Adress in base.lua

#21 Post by DocKy » Fri Dec 26, 2008 3:10 am

You can edit these value in Base.lua of Holic Bot


char_baseptr = 0x00BC3C50; --new

charHP_offset = 0x224; --new
charMaxHP_offset = 0x238; --new
charMP_offset = 0x234; --new
charMaxMP_offset = 0x23c; --new

charXPosition_addr = 0x007CE50C; --new -- float
charYPosition_addr = 0x007CE514; --new -- float


target_baseptr = 0x00BC3848 --new;

chokza
Posts: 3
Joined: Thu Dec 25, 2008 1:23 am

Re: Holic bot

#22 Post by chokza » Sat Dec 27, 2008 12:40 am

thx u :D

mhongski
Posts: 3
Joined: Wed Dec 24, 2008 6:24 am

Re: Holic bot

#23 Post by mhongski » Sat Dec 27, 2008 12:53 am

it seem like working~^^
but it seem like won't go back to the place u start, i will only go straight only @@"
can u teach us how to fix this problem?
what i means is it won't go back to Start Point*

DocKy
Posts: 2
Joined: Wed Dec 24, 2008 6:26 am

Re: Holic bot

#24 Post by DocKy » Tue Dec 30, 2008 12:45 am

Sorry for some problem...
I find pointer but I didn't using this bot...

Now I develop new bot for Holic by Java&Lua

I think this has some limit for me.

chokza
Posts: 3
Joined: Thu Dec 25, 2008 1:23 am

Re: Holic bot

#25 Post by chokza » Fri Jan 02, 2009 9:52 am

how to find
charXPosition_addr = 0x007CE50C; --new -- float
charYPosition_addr = 0x007CE514; --new -- float

:cry:

User avatar
Administrator
Site Admin
Posts: 5306
Joined: Sat Jan 05, 2008 4:21 pm

Re: Holic bot

#26 Post by Administrator » Fri Jan 02, 2009 10:17 am

Start by finding the X coordinate. Start an unknown value search with the float type. Now move to the west and search for decreased value. Move to the east, search increased value. Keep doing this until you've found the right address.

xcunh0x
Posts: 4
Joined: Wed Dec 24, 2008 3:30 am

Re: Holic bot

#27 Post by xcunh0x » Sat Jan 03, 2009 6:49 pm

i been trying your method but it gives me 5000+ values and the values wont get lower...is there a way to get the value down faster?

User avatar
Administrator
Site Admin
Posts: 5306
Joined: Sat Jan 05, 2008 4:21 pm

Re: Holic bot

#28 Post by Administrator » Sat Jan 03, 2009 7:25 pm

When you get to that point, try standing perfectly still and search for an unchanged value. Rotate your camera (or character) but do not move and search for unchanged value again. You should probably repeat these steps a few times to make sure you're not catching values that (seemingly) change randomly, which will filter out most of that 5,000 results.

Hopefully you'll be left with less than a hundred results or so. At this point, just use common sense and deduction. That is, if you get values like 0.00030452, that address is probably not what you want. Good values should be roughly between -10,000 to +10,000, give or take.

xcunh0x
Posts: 4
Joined: Wed Dec 24, 2008 3:30 am

Re: Holic bot

#29 Post by xcunh0x » Sat Jan 03, 2009 11:10 pm

thanx...i found a few address, but dont kno which is the right one, im trying all of it but not sure it helps at all....i have another question....is the
charXPosition_addr
charYPosition_addr
is the one that help gets the coords for the char to move back to the starting point...or do i have to fix the movement_wander?? thankx in advance

User avatar
Administrator
Site Admin
Posts: 5306
Joined: Sat Jan 05, 2008 4:21 pm

Re: Holic bot

#30 Post by Administrator » Sat Jan 03, 2009 11:46 pm

Just find the addresses and it should work again. You really shouldn't have to even find the Y address, since it typically will be the the X address + 4.

Spiderinfo
Posts: 2
Joined: Sun Jan 04, 2009 8:33 am

Re: Holic bot

#31 Post by Spiderinfo » Sun Jan 04, 2009 8:36 am

Always w i start the bot,i receiv this msg > WARNING:Failure reading memory from 0xA70EB8 at 0x95baa0 in memoryReadIntPtr<>.
Error code 299.
Error Acessing memory From holic.

Anyone know whats it ?

xcunh0x
Posts: 4
Joined: Wed Dec 24, 2008 3:30 am

Re: Holic bot

#32 Post by xcunh0x » Mon Jan 05, 2009 5:55 pm

is it me or have anyone else get the moved back to starting point to work?? i been trying many address n still couldnt get it to work....any ideas??

Finalazy
Posts: 2
Joined: Thu Jan 22, 2009 11:58 pm

Re: Holic bot

#33 Post by Finalazy » Fri Jan 23, 2009 12:01 am

Can Anyone teach us how to fix the move back to starter point fixed? coz it really very easy to get stuck and unable to attack or go to stronger monster, and die T.T
can anyone that good in micromacro help us, i'm newbi on this program.

Finalazy
Posts: 2
Joined: Thu Jan 22, 2009 11:58 pm

Re: Holic bot

#34 Post by Finalazy » Wed Feb 25, 2009 1:16 am

I think the game is patched again....
bot cannot be used already again... @@
can someone kindly help me? to fix it.

Zeno1
Posts: 12
Joined: Thu Feb 05, 2009 6:33 pm

Re: Holic bot

#35 Post by Zeno1 » Sun Apr 05, 2009 6:52 am

any chance some1 can help me update these addresses?

User avatar
Administrator
Site Admin
Posts: 5306
Joined: Sat Jan 05, 2008 4:21 pm

Re: Holic bot

#36 Post by Administrator » Sun Apr 05, 2009 6:56 pm

This hasn't been supported for awhile. I hear Holic added some protection (ie. GameGuard). Is this true?

Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests