Correct formula to detect if something is facing my position

Ask questions about cheating in any games you would like. Does not need to pertain to MicroMacro.
Post Reply
Message
Author
Exempt
Posts: 197
Joined: Wed Jan 20, 2010 9:55 am

Correct formula to detect if something is facing my position

#1 Post by Exempt » Thu Jul 12, 2012 9:41 am

What's the correct formula to detect if something is facing my position.

I have a std::map that holds every object in the area but I'd like to check wheater other objects/players are facing my direction. I'm pretty sure all I need is my position the other object position and it's current angle but I'm not sure how to calculate it.

User avatar
Administrator
Site Admin
Posts: 5313
Joined: Sat Jan 05, 2008 4:21 pm

Re: Correct formula to detect if something is facing my posi

#2 Post by Administrator » Thu Jul 12, 2012 11:22 am

math.atan2(y2-y1, x2-x1) will give you the angle between two points. First, get the angle that the object is looking, then compare it to the angle that you calculate with atan2(). If it is within some threshold, it is looking at you.

Remember that atan2() will return radians between 0 and 2PI. 6.27 and 0.0 would, really, be very close to each other. You'll need a special case to handle roll-overs in this gap.

Exempt
Posts: 197
Joined: Wed Jan 20, 2010 9:55 am

Re: Correct formula to detect if something is facing my posi

#3 Post by Exempt » Thu Jul 12, 2012 1:58 pm

My angle varaible is 0-360 I believe. I'm gonna look into this a bit and see what I can do. Thanks.

Exempt
Posts: 197
Joined: Wed Jan 20, 2010 9:55 am

Re: Correct formula to detect if something is facing my posi

#4 Post by Exempt » Fri Jul 13, 2012 11:46 am

Ok, so I've figured out how this math works now I'm onto another smal math problem. After I watched the angle variable I get from the object it a byte between 0 and 254. How could I convert my 0-359 degrees to 0-254?
I figured this out after some brain storming... "headache" degree = (angle * (255/2) / PI)

EDIT: That was a dumb question but now I've got another...probably easy too. The angle also rotates counter clockwise how could I reverse the way it rotates?

Code: Select all

const float PI = 3.1415;

int main()
{
    int x1 = 1111;
    int y1 = 1111;
    int x2 = 1200;
    int y2 = 1111;

    float angle = atan2(y2-y1, x2-x1);
    float degree = (angle * 180 / PI);
    printf("atan2 Angle: %f Degree: %f\n", angle, degree);

    system("pause");

    return 0;
}

User avatar
Administrator
Site Admin
Posts: 5313
Joined: Sat Jan 05, 2008 4:21 pm

Re: Correct formula to detect if something is facing my posi

#5 Post by Administrator » Fri Jul 13, 2012 12:23 pm

Why would you change that? That's the natural way math dealing with circles works. You really shouldn't bother converting to/from degrees or worrying about the angle being clockwise or counter-clockwise. Adding unnecessary complications like that will only make it more difficult to understand. Still, if you're really set on doing that, you could always just take the full circle (2PI) and subtract the angle you get.

Additionally, you should use math.pi instead of your own constant.

Exempt
Posts: 197
Joined: Wed Jan 20, 2010 9:55 am

Re: Correct formula to detect if something is facing my posi

#6 Post by Exempt » Fri Jul 13, 2012 12:51 pm

Well what's happening is...

I'm reading from a packet where all the players, NPC, enemies...everything is. In the packet it's send me a rotation byte 0-255. What I'm trying to do it check wheater the unit is facing me based on the rotation it has (0-255) This variable moves from 0 = right, 65 = up, 131 = left, 189 = down... Them are not exact but thre fairly close and it covers every rotation in between. The variable is going counter clockwise so I can't just match up my degrees with this variable. I need to convert what I have to degrees that go counter clockwise I guess? I don't know how else to do it.

Edit: Should I try to convert the byte 0-255 to rads?

User avatar
Administrator
Site Admin
Posts: 5313
Joined: Sat Jan 05, 2008 4:21 pm

Re: Correct formula to detect if something is facing my posi

#7 Post by Administrator » Fri Jul 13, 2012 2:26 pm

As for clockwise vs counter-clockwise, I think you are just using the wrong origin. The angle from player to target would be the inverse of target to player. I think that could be your issue.

1-byte angles, variously named but I'm most familiar with 'Allegro degrees', are easy to convert to and from. To convert your radians, just do this:

Code: Select all

adeg = radians*255 / (math.pi*2);

Exempt
Posts: 197
Joined: Wed Jan 20, 2010 9:55 am

Re: Correct formula to detect if something is facing my posi

#8 Post by Exempt » Sat Jul 14, 2012 9:56 am

x2/y2 = target positions
x1/y1 = player positions

What I was doing is

Code: Select all

float radians = atan2(y2-y1, x2-x1);
float degree = (angle * (255/2) / PI);
Is this the correct way to turn a 1byte angle into a radian?

Code: Select all

radians = tan(byteAngle * PI / 127.5); //127.5 = (255/2)
EDIT:

NVM! It was a stupid error on my part.. I forgot to add the second param to printf so it was printing some random number for radians instead of the actualy radians! Woks perfect. Thanks for the help :D.. If i keep messing with this stuff I may actually learn some math.

Code: Select all

 printf("atan2 Angle: %f byte Angle: %f\n", angle, radians);
EDIT: Ok now assuming my the player object y is 10 and the target is 0, when I use atan2(y2-y1, x2-x1) the output is :

These 2 should be equal. player = y10 target = 0 would mae the player lower the the target which is what 191.25 in degrees for the byte angle.
atan2 Angle: -1.570796 byte Angle: 4.712389
Press any key to continue . . .

Code: Select all

#include <math.h>

int main()
{
    int x1 = 0;
    int y1 = 10;
    int x2 = 0;
    int y2 = 0;

    float angle = atan2(y2-y1, x2-x1);
    float radians = 191.25 * M_PI / 127.5; //127.5 = (255/2)
    printf("atan2 Angle: %f byte Angle: %f\n", angle, radians);

    system("pause");

    return 0;
}
works fine untill atan2 goes into the neg range then radians jut keeps going +.

User avatar
Administrator
Site Admin
Posts: 5313
Joined: Sat Jan 05, 2008 4:21 pm

Re: Correct formula to detect if something is facing my posi

#9 Post by Administrator » Sat Jul 14, 2012 12:18 pm

My mistake. atan2 goes from -pi to pi. To correct that, just add pi to the result and everything should be fine.

Exempt
Posts: 197
Joined: Wed Jan 20, 2010 9:55 am

Re: Correct formula to detect if something is facing my posi

#10 Post by Exempt » Sat Jul 14, 2012 1:01 pm

Darn, wish I would have figured that one out. Works good now, thanks.

Just incase anyone has a similar problem..

Code: Select all

float angle = atan2(y2-y1, x2-x1)+(M_PI);//I  find the radian between the target and myself.
float radians = byteAngle * (M_PI / 127.5); //I get the byteAngle from the packet for the target then convertit to radians.
//If they both match within a range I'll set the target is facing me to true.
EDIT:
I'll probably just convert the rads to degrees tho to make it easier for me.

Code: Select all

float angle = atan2(y2-y1, x2-x1)+(M_PI);//I  find the radian between the target and myself.
float radToDeg = angle * (127.5 / M_PI);//I'd compare with the degrees for simplicities sake and to not break my mind.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests