Shaiya[US] - Shaiya Bot ZS

For any other game that doesn't have its own section.
Post Reply
Message
Author
chopstick19
Posts: 12
Joined: Wed Feb 04, 2009 6:32 am

Re: Shaiya[US] - ZS Shaiya Bot

#221 Post by chopstick19 » Fri Mar 20, 2009 8:51 am

Hey i was wondering if the shaiya bot still works for the new patch. It doesnt seem to work for me it shows this error message plz help me.

Code: Select all

Code: Select all

MicroMacro v0.99
SolarImpact
http://solarimpact.servegame.com


Opening main.lua...

Starting script execution - Press CTRL+C to exit.
Press CTRL+L to cancel execution and load a new script.
-------------------------------------------------

Make sure you start the script when you have switched to the Game window!!
The macro is currently not running. Press the start key (Insert) to begin.
You may use () key to stop/pause the script.
Started.
macro_init()
interface=INTERFACE_1024X768
Shaiya Window process ID: 1311696
win_width: 1024, win_height: 768

WARNING: Failure reading memory from 0x1F54D18 at 0x834cf4 in memoryReadIntPtr()
. Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request
 was completed.)
WARNING: Failure reading memory from 0x1F54D18 at 0x834cf4 in memoryReadIntPtr()
. Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request
 was completed.)
WARNING: Failure reading memory from 0x1F54D18 at 0x834cf4 in memoryReadIntPtr()
. Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request
 was completed.)
WARNING: Failure reading memory from 0x1F54D18 at 0x834cf4 in memoryReadIntPtr()
. Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request
 was completed.)
WARNING: Failure reading memory from 0x1F54D18 at 0x834cf4 in memoryReadIntPtr()
. Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request
 was completed.)
WARNING: Failure reading memory from 0x1F54D18 at 0x834cf4 in memoryReadIntPtr()
. Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request
 was completed.)
WARNING: Failure reading memory from 0x1F54D18 at 0x834cf4 in memoryReadIntPtr()
. Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request
 was completed.)
WARNING: Failure reading memory from 0x1F54D18 at 0x834cf4 in memoryReadIntPtr()
. Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request
 was completed.)
WARNING: Failure reading memory from 0x1F54D18 at 0x834cf4 in memoryReadFloatPtr
(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory reque
st was completed.)
WARNING: Failure reading memory from 0x1F54D18 at 0x834cf4 in memoryReadFloatPtr
(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory reque
st was completed.)
WARNING: Failure reading memory from 0x1F54D18 at 0x834cf4 in memoryReadFloatPtr
(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory reque
st was completed.)
WARNING: Failure reading memory from 0x1F54D18 at 0x834cf4 in memoryReadFloatPtr
(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory reque
st was completed.)
WARNING: Failure reading memory from 0x1F54D18 at 0x834cf4 in memoryReadFloatPtr
(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory reque
st was completed.)
hp: 0
Cannot open file './/char/.xml' for reading.


Please enter the script name to run.
Type in 'exit' (without quotes) to exit.
Script>
Top
sulfurio
Posts: 7
Joined: Tue Dec 23, 2008 4:14 am

Re: Shaiya[US] - ZS Shaiya Bot

#222 Post by sulfurio » Fri Mar 20, 2009 9:43 am

AVATAR_PTR = 0x00836DD0
AVATAR_NAME_ADDRESS = 0x0083AC54

Thats what i found but still not working, seems it cant check the hp and skill timing
anyone can help ???
( Loooking at Administrator and Zero :P )
Top
Yorkshire
Posts: 21
Joined: Wed Mar 18, 2009 5:16 pm

Re: Shaiya[US] - ZS Shaiya Bot

#223 Post by Yorkshire » Fri Mar 20, 2009 10:18 am

What did you scan to get the AVATAR_NAME_ADDRESS ??? sulfurio ??
Top
sulfurio
Posts: 7
Joined: Tue Dec 23, 2008 4:14 am

Re: Shaiya[US] - ZS Shaiya Bot

#224 Post by sulfurio » Fri Mar 20, 2009 11:32 am

Yorkshire wrote:What did you scan to get the AVATAR_NAME_ADDRESS ??? sulfurio ??
Scanned the Avatar name (Text)
Top
Yorkshire
Posts: 21
Joined: Wed Mar 18, 2009 5:16 pm

Re: Shaiya[US] - ZS Shaiya Bot

#225 Post by Yorkshire » Sat Mar 21, 2009 3:12 am

After many hours scanning i managed to get it working allmost 100% try thease addresses.

AVATAR_PTR = 0x00836D34
AVATAR_NAME_ADDRESS = 0x0083AC54
--AVATAR_ACTION_ADDR = 0x006E6D80
MEM_ADDRESS_AVATAR_LEVEL = 0x00837850
--MAP_NAME = 0x1745A7E0

-- MESSAGE ADDRESSES
MEM_GAME_MESSAGE_OFFSET = 0x006f4d88
MEM_GAME_MESSAGE_INDEX = MEM_GAME_MESSAGE_OFFSET + 0x1404
MEM_GAME_MESSAGE_SIZE = 0x400
MEM_COMMON_MESSAGE_OFFSET = 0x0220D217

I used the mulit client go back a page to find it.


Its not perfect i know but it dose work till zero can maby help :)
i know some addreses still need scanning

Let me know if thease work guys thx.
Top
chandell
Posts: 1
Joined: Sat Mar 21, 2009 7:53 am

Re: Shaiya[US] - ZS Shaiya Bot

#226 Post by chandell » Sat Mar 21, 2009 8:09 am

Yorkshire wrote:After many hours scanning i managed to get it working allmost 100% try thease addresses.

AVATAR_PTR = 0x00836D34
AVATAR_NAME_ADDRESS = 0x0083AC54
--AVATAR_ACTION_ADDR = 0x006E6D80
MEM_ADDRESS_AVATAR_LEVEL = 0x00837850
--MAP_NAME = 0x1745A7E0

-- MESSAGE ADDRESSES
MEM_GAME_MESSAGE_OFFSET = 0x006f4d88
MEM_GAME_MESSAGE_INDEX = MEM_GAME_MESSAGE_OFFSET + 0x1404
MEM_GAME_MESSAGE_SIZE = 0x400
MEM_COMMON_MESSAGE_OFFSET = 0x0220D217

I used the mulit client go back a page to find it.


Its not perfect i know but it dose work till zero can maby help :)
i know some addreses still need scanning

Let me know if thease work guys thx.
Yep... It works ^.^
Thanks for the effort....
Top
zer0
Posts: 213
Joined: Sat Feb 16, 2008 11:55 pm

Re: Shaiya[US] - ZS Shaiya Bot

#227 Post by zer0 » Sun Mar 22, 2009 7:51 am

New release made to be compatible with latest Shaiya version 47.

See First post.

v0.0352b -
* Memory address offsets moved to config.xml.
* Removal of some redundant code.
Top
Yorkshire
Posts: 21
Joined: Wed Mar 18, 2009 5:16 pm

Re: Shaiya[US] - Shaiya Bot ZS

#228 Post by Yorkshire » Tue Mar 24, 2009 3:36 am

Ty zero exellent work i cant seem to get the vm bat working in vm tho. (Vmware)


.//classes/hook.lua:126: bad argument #2 to 'memoryReadString' ((null))

works fine with launch bat tho ??

Great work zero ty again.
Top
zcarlz
Posts: 16
Joined: Fri Dec 19, 2008 5:34 am

Re: Shaiya[US] - Shaiya Bot ZS

#229 Post by zcarlz » Wed Mar 25, 2009 7:38 am

v0.0352b
works good.... but sometimes it search for target too fast after killing mobs... make it search target--->attack---> pick up--->search target--->attack
Happens to me quite often
Top
zer0
Posts: 213
Joined: Sat Feb 16, 2008 11:55 pm

Re: Shaiya[US] - Shaiya Bot ZS

#230 Post by zer0 » Thu Mar 26, 2009 5:40 am

Regarding v0.0352b:
It looks like it has a few bugs, I will make another minor release when I have tested it more extensively. ;)
Top
sulfurio
Posts: 7
Joined: Tue Dec 23, 2008 4:14 am

Re: Shaiya[US] - Shaiya Bot ZS

#231 Post by sulfurio » Fri Mar 27, 2009 6:21 am

Thx for the update Zero , i have a question/idea about how to make it work better .
If we are able to change the text color of the mobs we want attack , we could make it attack only some mobs so our char dont go in a place we dont want .
Alot of time my char go stuck somewhere couse it attack other mobs ( green or cyan ) near the area i have choose. But in that different area my char stuck couse of bad mobs/environment.
Its possible to change for example the mobs text to pink ?
Top
nknwn666
Posts: 30
Joined: Fri Feb 20, 2009 3:45 pm

Re: Shaiya[US] - Shaiya Bot ZS

#232 Post by nknwn666 » Fri Mar 27, 2009 11:58 am

sulfurio wrote:Thx for the update Zero , i have a question/idea about how to make it work better .
If we are able to change the text color of the mobs we want attack , we could make it attack only some mobs so our char dont go in a place we dont want .
Alot of time my char go stuck somewhere couse it attack other mobs ( green or cyan ) near the area i have choose. But in that different area my char stuck couse of bad mobs/environment.
Its possible to change for example the mobs text to pink ?
u cant change the mobs text color,but u can change what color mobs u want to attack in your avatar.xml

Code: Select all

<!--
 The avatar options are listed here, for a complete list, see ./classes/avatar.lua 
-->
−
<options>
<option name="hp_sit_multiplier" value="0.4"/>
<option name="mp_sit_multiplier" value="0.0"/>
<option name="sp_sit_multiplier" value="0.2"/>
<option name="target_difficulty_color_min" value="blue"/>
<option name="target_difficulty_color_max" value="yellow"/>
<!--<option name="waypoint_enabled" value="true" />-->
<!--<option name="" value="" />-->
</options>
Top
sulfurio
Posts: 7
Joined: Tue Dec 23, 2008 4:14 am

Re: Shaiya[US] - Shaiya Bot ZS

#233 Post by sulfurio » Fri Mar 27, 2009 2:28 pm

lol i know it im not talking about the bot but about a client side mod to change the color of the mobs text.
Top
zer0
Posts: 213
Joined: Sat Feb 16, 2008 11:55 pm

Re: Shaiya[US] - Shaiya Bot ZS

#234 Post by zer0 » Mon Mar 30, 2009 1:23 am

sulfurio wrote:lol i know it im not talking about the bot but about a client side mod to change the color of the mobs text.
A better idea would be to have an optional feature to allow of list of mob names that it can attack.

There is one big issue though, I tried to locate the target mob pointer with no success.
http://solarimpact.servegame.com/phpBB3 ... ?f=2&t=220
Top
Intermezzo
Posts: 3
Joined: Mon Mar 30, 2009 10:45 am

Re: Shaiya[US] - Shaiya Bot ZS

#235 Post by Intermezzo » Mon Mar 30, 2009 10:48 am

Hello.
First at all i wanted to say: "Your bot is the best arround"
But i want to get it to work with the german Client. Any sugestions?

edit: Ok I have to change them Mem adress in Config. How do I find them? From a german bot i got this one for the Avatar_pointer 0x82B6B4. I believe its right cause the only error i get is that it can't read the Char.xml.

edit 2:
<config name="mem_avatar_pointer">0x82B6B4</config>
<config name="mem_avatar_name_offset">0x82E2BE</config>
<config name="mem_avatar_level_offset">0x82E210</config>

<config name="mem_text_message_offset">0x6E8CF8</config>
<config name="mem_text_message_offset_index">0x6E9708</config>
<config name="mem_text_message_size">0x400</config>
<config name="mem_text_message_common_offset">0x6E9100</config>
<config name="mem_text_message_entered_offset">0x2201AB3</config>

ok i think i've got allexcept off the text_message_size but the Bot only buffs and searches for targets. It always says "timed out"
Top
Intermezzo
Posts: 3
Joined: Mon Mar 30, 2009 10:45 am

Re: Shaiya[US] - Shaiya Bot ZS

#236 Post by Intermezzo » Wed Apr 01, 2009 5:38 am

couldn't anyone help me?
Top
zer0
Posts: 213
Joined: Sat Feb 16, 2008 11:55 pm

Re: Shaiya[US] - Shaiya Bot ZS

#237 Post by zer0 » Fri Apr 03, 2009 1:07 am

v0.0353b - Released.

Should hopefully fix the targeting a bit more, also will hopefully avoid bugged monsters from occurring (0 HP Monsters).
Flee function was also improved a little.

See First post.

Intermezzo:
text_message_size won't change at all, at least I think their would be no difference among other language clients.

What you do need to do though is look in "classes/gui.lua" and the "GUI_TEXT" constants at the start will need to be localised into the language the client uses. Also if the Skill names are different in "data/skills.xml" they will also need to be localised.

In a future release I will move those GUI_TEXT constants into the config.xml file so localisation can be made a bit more easier.
Top
Intermezzo
Posts: 3
Joined: Mon Mar 30, 2009 10:45 am

Re: Shaiya[US] - Shaiya Bot ZS

#238 Post by Intermezzo » Sat Apr 04, 2009 8:00 am

OK i didn't know that i've to chage the gui_txt constants. Now I#ve changed nearly all but i've a problem with GUI_TEXT_MESSAGE_SKILL_USED.

When i use concentration the Gui says in german "Konzentration Stufe 2 genutzt."
(Konzentration=concentration, Stufe=level, genutzt=used)
For GUI_TEXT_MESSAGE_SKILL_USED i use "%s(.*) genutzt." but it doesnt do the trick. How do i have to change it?
Top
intel123
Posts: 14
Joined: Mon Dec 01, 2008 9:11 am

Re: Shaiya[US] - Shaiya Bot ZS

#239 Post by intel123 » Tue Apr 07, 2009 12:54 am

i have two Problems one is the bot doesnt attack unless i hit attack key second when start hitting the mobs it keep attacking another mobs if anyone can help i will apreaciate it

im using windows Xp Proffesional


this is my character settings


<avatar>
<shortcuts>
<!-- These are your action shortcuts -->
<shortcut type="action" mode="attack" bar="1" slot="1" />
<shortcut type="action" mode="pickup" bar="1" slot="6" />
<!-- These are your skill attack shortcuts -->
<shortcut type="skill" mode="attack" bar="1" slot="2" name="Ground Boom" level="3" />
<shortcut type="skill" mode="attack" bar="1" slot="3" name="Curse Raid" level="3" />
<shortcut type="skill" mode="attack" bar="1" slot="4" name="Panic" level="3" />
<!--<shortcut type="skill" mode="attack" bar="1" slot="" name="" level="" />-->
<!-- These are your skill buff shortcuts -->
<shortcut type="skill" mode="buff" bar="1" slot="7" name="Hard Skin" level="3" />
<shortcut type="skill" mode="buff" bar="1" slot="8" name="Bash" level="2" />
<shortcut type="skill" mode="buff" bar="1" slot="9" name="Concentration" level="2" />
<shortcut type="skill" mode="buff" bar="1" slot="0" name="Tactical Formation" level="3" />
<!--<shortcut type="skill" mode="buff" bar="1" slot="" name="" level="" />-->
<!-- These are your potion shortcuts - Only bar 1 and 2 (if 2nd shortcut bar is open) supported. -->
<shortcut type="potion" mode="hp" bar="2" slot_start="1" slot_end="6" tolerance="65" />
<shortcut type="potion" mode="sp" bar="2" slot_start="7" slot_end="8" tolerance="50" />
<shortcut type="potion" mode="mp" bar="2" slot_start="9" slot_end="0" tolerance="50" />
<!--<shortcut type="potion" mode="" bar="2" slot_start="" slot_end="" tolerance="" />-->
</shortcuts>
<!-- The avatar options are listed here, for a complete list, see ./classes/avatar.lua -->
<options>
<option name="mp_sit_multiplier" value="0.2" />
<option name="sp_sit_multiplier" value="0.2" />
<option name="target_difficulty_color_min" value="white" />
<option name="target_difficulty_color_max" value="orange" />
<!--<option name="waypoint_enabled" value="true" />-->
<!--<option name="" value="" />-->
</options>
</avatar>
Top
shakey
Posts: 56
Joined: Sun Nov 16, 2008 4:02 am

Re: Shaiya[US] - Shaiya Bot ZS

#240 Post by shakey » Fri Apr 10, 2009 2:05 am

Code: Select all

Thu Apr 09 23:01:27 2009 : MicroMacro v0.99
Thu Apr 09 23:01:27 2009 : Processor Type: 2X 586, OS: Windows Vista | Windows Server 2008 Service Pack 1
Thu Apr 09 23:01:27 2009 : Lua initialized successfully.
Thu Apr 09 23:01:27 2009 : Lua libs opened successfully.
Thu Apr 09 23:01:27 2009 : LuaCoco is available.
Thu Apr 09 23:01:27 2009 : Lua glues exported.
Thu Apr 09 23:01:27 2009 : Keyboard layout: US English
Thu Apr 09 23:01:27 2009 : Configurations run.
Thu Apr 09 23:01:27 2009 : Executing script "main.lua".
==================================================

Thu Apr 09 23:01:30 2009 : macro_init()
Thu Apr 09 23:01:30 2009 : interface=INTERFACE_1280X1024
Thu Apr 09 23:01:30 2009 : Shaiya Window process ID: 1966968
Thu Apr 09 23:01:30 2009 : win_width: 1280, win_height: 1014

Thu Apr 09 23:01:30 2009 : name: 
Thu Apr 09 23:01:30 2009 : avatar_name: 
Thu Apr 09 23:01:30 2009 : WARNING: Failure reading memory from 0x173C0B8 at 0x834cf4 in memoryReadIntPtr(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request was completed.)

Thu Apr 09 23:01:30 2009 : WARNING: Failure reading memory from 0x173C0B8 at 0x834cf4 in memoryReadIntPtr(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request was completed.)

Thu Apr 09 23:01:30 2009 : WARNING: Failure reading memory from 0x173C0B8 at 0x834cf4 in memoryReadIntPtr(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request was completed.)

Thu Apr 09 23:01:30 2009 : WARNING: Failure reading memory from 0x173C0B8 at 0x834cf4 in memoryReadIntPtr(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request was completed.)

Thu Apr 09 23:01:30 2009 : WARNING: Failure reading memory from 0x173C0B8 at 0x834cf4 in memoryReadIntPtr(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request was completed.)

Thu Apr 09 23:01:30 2009 : WARNING: Failure reading memory from 0x173C0B8 at 0x834cf4 in memoryReadIntPtr(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request was completed.)

Thu Apr 09 23:01:30 2009 : WARNING: Failure reading memory from 0x173C0B8 at 0x834cf4 in memoryReadIntPtr(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request was completed.)

Thu Apr 09 23:01:30 2009 : WARNING: Failure reading memory from 0x173C0B8 at 0x834cf4 in memoryReadIntPtr(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request was completed.)

Thu Apr 09 23:01:30 2009 : WARNING: Failure reading memory from 0x173C0B8 at 0x834cf4 in memoryReadFloatPtr(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request was completed.)

Thu Apr 09 23:01:30 2009 : WARNING: Failure reading memory from 0x173C0B8 at 0x834cf4 in memoryReadFloatPtr(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request was completed.)

Thu Apr 09 23:01:30 2009 : WARNING: Failure reading memory from 0x173C0B8 at 0x834cf4 in memoryReadFloatPtr(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request was completed.)

Thu Apr 09 23:01:30 2009 : WARNING: Failure reading memory from 0x173C0B8 at 0x834cf4 in memoryReadFloatPtr(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request was completed.)

Thu Apr 09 23:01:30 2009 : WARNING: Failure reading memory from 0x173C0B8 at 0x834cf4 in memoryReadFloatPtr(). Error code 299 (Only part of a ReadProcessMemory or WriteProcessMemory request was completed.)


stack traceback:
	...:\Users\Jessica\Desktop\Chris\micromacro\lib\lib.lua:476: in function 'startMacro'
	main.lua:175: in main chunk

----------TRACEBACK END----------

Thu Apr 09 23:01:30 2009 : Cannot open file './/char/.xml' for reading.
Thu Apr 09 23:01:30 2009 : Execution of main.lua complete.
Thu Apr 09 23:01:30 2009 : Execution error: Runtime error
Thu Apr 09 23:01:30 2009 : Collecting garbage...
Thu Apr 09 23:01:30 2009 : GC closed process handle 0xDC.
Thu Apr 09 23:01:30 2009 : 162KB freed.
Seems to me it's not loading up the character.xml at all.
Top
Post Reply

Return to “Everything else”



Who is online

Users browsing this forum: No registered users and 2 guests